Product Description:

The MHP071B-061-HP1-UNNNNN is a synchronous servo motor produced by Bosch Rexroth Indramat within the MHP Synchronous Motors series. As a compact rotary actuator, it delivers closed-loop torque and speed control to positioning axes, pick-and-place heads, and packaging spindles inside automated machinery. In this role, the motor converts drive commands into controlled rotary motion for indexing tables, transfer units, and other coordinated machine functions. Its compact frame also suits installations where mounting space is limited but repeatable motion is still required.

The stator winding code of 061 identifies the electrical configuration used for this motor, and the unit can produce a continuous standstill torque of 8.0 Nm when cooled by natural convection through the finned housing. For short power-off holding conditions, an integrated brake provides 6.5 Nm of static torque. The enclosure is rated at IP65, which helps protect internal parts from dust and low-pressure water jets during operation. The motor can operate in ambient temperatures from 0 to +40 °C, and its size 71 construction with the medium B length gives it a balanced combination of inertia and torque for compact machine axes.

For feedback, the motor uses an incremental encoder with 2048 increments, allowing the drive controller to track shaft rotation with fine resolution. Mechanical output is transferred through a keyed shaft with a sealing ring, and the seal helps protect the bearing area during operation. A keyed output is useful where the coupling must resist slip under repeated acceleration and deceleration. The supply leads exit through a 270° turnable connector, which makes cable routing easier in tight machine layouts. The windings use insulation class F, which supports the thermal demands associated with normal servo operation.