Product Description:

The MHP071B-035-HG0-UNNNNN is a rotating actuator produced by Bosch Rexroth Indramat within the MHP Synchronous Motors series. It is intended for servo axes that demand precise position and speed regulation in automated assembly lines, packaging units, and material-handling gantries. By combining permanent-magnet excitation with digital feedback, the motor converts controlled drive current into mechanical motion that can be integrated directly into closed-loop industrial automation. Its operating concept suits applications that require repeatable movement, stable response, and compact motor integration on coordinated machine axes.

At standstill, the motor supplies a continuous torque of 8.0 Nm while cooling is handled by ambient air rather than forced ventilation. Position data is provided by an incremental encoder that delivers 2048 increments per revolution, supporting accurate velocity and alignment control. Electrical insulation is rated for class F temperatures, and the enclosure meets IP65 protection so airborne dust and low-pressure water jets do not reach internal components. Reliable operation is maintained in rooms held between 0 to +40 °C, which suits enclosed production equipment and general indoor industrial installations. The motor is supplied without a holding brake, so any required load retention must be provided by the drive system or an external locking method.

The output shaft is a plain shaft with a sealing ring, which helps maintain enclosure integrity when the motor is coupled to gearboxes or pulleys. The power connector can be swiveled through 270°, making cable routing easier where installation space is restricted. The motor uses winding code 035, and it has a frame size of 71 with length code B. This combination gives the unit a compact mechanical format suitable for precise servo-axis installation. The arrangement supports straightforward integration into machines that need controlled rotary motion without auxiliary cooling hardware.