MHD131D-024-PG2-AN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911287312
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
41 Seconds
The Bosch Rexroth Indramat MHD131D-024-PG2-AN is part of the MHD Synchronous Motors series and is a liquid cooled servo motor with a flange size of 260 mm and centering diameter of 250 mm. It features digital servo feedback with integrated encoder for absolute position detection, and provides a continuous torque at standstill of 160 Nm. The motor has an IP65 degree of protection and comes equipped with a holding brake rated for 240 Nm.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MHD131D-024-PG2-AN is a servo motor manufactured by Bosch Rexroth Indramat for the MHD Synchronous Motors series. It combines motor size 131, length code D, and winding code 024 to provide high torque in compact frames used on gantries, presses, and material-handling axes. A plain shaft transmits motion, and power is routed through an output connector positioned on side A of the stator housing. Position data comes from a digital servo feedback encoder that uses optical measurement and offers absolute tracking over more than 4096 revolutions. This feedback arrangement lets the connected drive retain position information after shutdown and supports accurate motion control when the axis restarts. That combination is useful on axes that require repeatable positioning under changing load conditions.
During continuous stall conditions, the rotor can deliver 160 Nm of torque, and jacket-type liquid cooling draws heat away from the windings. The unit bolts to machinery with a 260 mm square flange, while a 250 mm centering diameter helps keep the motor aligned during installation. An enclosure rating of IP65 keeps dust and water jets away from internal components, making the motor suitable for demanding industrial environments. Closed-loop positioning precision is supported by a system accuracy of ±0.5 angular minutes, which helps limit tracking error during coordinated multi-axis movement. Absolute position detection and optical scanning also support stable feedback quality across the operating speed range.
A permanent-magnet holding brake supplies 240 Nm of static torque to secure vertical loads when the drive is disabled. The brake also helps prevent unintended movement during power loss or controlled stops. The motor may be stored between -20 to +80 °C, and installation sites can be located at elevations up to 1000 m above MSL. A shaft seal helps keep lubricant contained and limits contamination at the shaft opening, while insulation to Class F supports the thermal demands of cyclic operation. The stated ambient operating range of 0 to 40 °C makes the unit suitable for standard indoor industrial conditions.
Frequently Asked Questions about MHD131D-024-PG2-AN:
Q: What is the continuous torque at standstill for the MHD131D-024-PG2-AN motor?
A: The MHD131D-024-PG2-AN provides a continuous torque at standstill of 160 Nm.
Q: Does the MHD131D-024-PG2-AN motor include a holding brake and what is its torque?
A: This model features a holding brake with a torque of 240 Nm for secure load holding when powered off.
Q: What type of cooling does the MHD131D-024-PG2-AN motor use?
A: The MHD131D-024-PG2-AN motor uses liquid cooling to manage its operating temperature.
Q: What kind of encoder and position detection does the MHD131D-024-PG2-AN have?
A: This motor uses a digital servo feedback system with an integrated encoder that supports absolute position detection for over 4096 revolutions.
Q: What is the degree of protection for the MHD131D-024-PG2-AN motor?
A: The MHD131D-024-PG2-AN features an IP65 protection degree, making it resistant to dust and water spray.
