MHD131D-024-NP2-AN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911299011
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
3 Minutes
43 Seconds
The Bosch Rexroth Indramat MHD131D-024-NP2-AN is a servo motor from the MHD Synchronous Motors series, featuring a keyed shaft and liquid cooling. It offers a continuous torque at standstill of 160 Nm and is equipped with a holding brake providing 240 Nm of torque. The motor has IP65 protection, a flange size of 260 mm, and uses a digital servo feedback encoder for position detection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MHD131D-024-NP2-AN servo motor is manufactured by Bosch Rexroth Indramat and belongs to the MHD Synchronous Motors series. It converts three-phase electric power into regulated mechanical rotation for industrial axes that demand high torque and precise incremental positioning. A keyed output shaft transmits motion directly to the driven load, and the factory-installed holding brake keeps the axis from drifting when drive power is removed. It also supports smooth speed regulation and repeatable stopping when paired with a compatible servo drive.
At standstill, the motor sustains 160 Nm of continuous torque, and liquid cooling circulates through the housing to carry heat away from the stator. The enclosure has an IP65 rating that helps keep dust and water jets away from internal components. A centering pilot of 250 mm supports accurate alignment on the machine interface, and the 260 mm flange matches the size-131 stator geometry with D-length construction. Optical measurement with digital servo feedback provides relative position data with a system accuracy of ± 0.5 angular minutes. Power enters through a connector on side A, which can simplify cable routing in tightly packed assemblies, and a shaft seal helps reduce lubricant escape around the output end.
The electromagnetic brake provides 240 Nm of static torque, allowing suspended or vertical loads to remain locked without external clamps. Continuous operation is permitted in ambient temperatures from 0 to 40 °C, while storage is allowed from −20 to +80 °C when the motor is not in service. Installation is permitted up to 1000 m above mean sea level, and insulation class F supports the winding system during prolonged current loading. The brake is useful where the axis must remain fixed between cycles or during controlled shutdowns.
Frequently Asked Questions about MHD131D-024-NP2-AN:
Q: What is the continuous torque at standstill for the MHD131D-024-NP2-AN motor?
A: The MHD131D-024-NP2-AN servo motor has a continuous torque at standstill of 160 Nm.
Q: What type of housing cooling does the MHD131D-024-NP2-AN use?
A: This motor features liquid cooling for its housing, which helps maintain its operating temperature.
Q: Does the MHD131D-024-NP2-AN come with a holding brake, and what is its torque rating?
A: The MHD131D-024-NP2-AN includes a holding brake with a torque capacity of 240 Nm.
Q: What encoder type is used in the MHD131D-024-NP2-AN servo motor?
A: It is equipped with a digital servo feedback (HSF) encoder for position detection.
Q: What level of environmental protection does the MHD131D-024-NP2-AN offer?
A: This motor has an IP65 degree of protection, making it dust tight and protected against water jets.
