MHD131D-024-NP1-AN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911293043
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
24 Seconds
The Bosch Rexroth Indramat MHD131D-024-NP1-AN is a servo motor from the MHD Synchronous Motors series with a continuous standstill torque of 160 Nm and degree of protection rated at IP65. This model features a 260 mm flange size, keyed shaft design, and includes a holding brake providing 100 Nm of torque. The motor is liquid cooled and uses digital servo feedback for encoder type.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MHD131D-024-NP1-AN is a servo motor manufactured by Bosch Rexroth Indramat within the MHD Synchronous Motors series. It uses winding code 024, corresponds to motor size 131, and carries the length designation D. The unit supplies closed-loop rotary motion for industrial automation axes where electronic drives issue position, speed, and torque commands. Its design supports high-load cyclic applications in packaging, printing, and material handling. This role suits machinery that must accelerate, hold position, and reverse direction repeatedly during normal production cycles.
At standstill, the motor delivers 160 Nm of continuous torque, allowing heavy tooling to remain stationary without additional gearing. The housing meets IP65, so internal components are sealed against dust and directed water jets. Rotor position is monitored through Digital servo feedback (HSF), which is read optically and interpreted as relative data by the drive. Mechanical alignment to adjacent machinery is simplified by a 250 mm centering diameter and a 260 mm square flange. Heat is removed through liquid cooling, which helps maintain steady temperatures while the keyed shaft transmits power. Electrical energy reaches the stator through an output connector on side A, which can help keep cable routing orderly in compact cabinets. A positive shaft seal is installed to limit oil ingress during washdown duty.
The built-in holding brake exerts 100 Nm when the drive is disabled, preventing back-driving on vertical axes. Motion repeatability relies on system accuracy of ±0.5 angular minutes, which suits point-to-point tasks that require fine angular positioning. Windings are insulated to Class F, helping the stator tolerate cyclic thermal loading while operating within an ambient range of 0 to 40 °C. Installation is permitted at heights up to 1000 m above mean sea level, and extended storage is allowed between -20 and +80 °C. The optical measurement method avoids contact wear in the feedback path, which supports stable feedback behavior through repeated starts, stops, and holding periods.
Frequently Asked Questions about MHD131D-024-NP1-AN:
Q: What type of encoder is built into the MHD131D-024-NP1-AN motor?
A: The MHD131D-024-NP1-AN motor uses digital servo feedback (HSF) for position detection.
Q: Does the MHD131D-024-NP1-AN include a holding brake, and what is its torque rating?
A: This motor is equipped with a holding brake capable of delivering 100 Nm of torque.
Q: What type of housing cooling does the MHD131D-024-NP1-AN feature?
A: Liquid cooling is used for the housing of this motor for effective thermal management.
Q: What is the ingress protection rating of the MHD131D-024-NP1-AN servo motor?
A: The degree of protection for this model is rated at IP65.
Q: What is the continuous torque available at standstill on the MHD131D-024-NP1-AN?
A: The MHD131D-024-NP1-AN delivers a continuous standstill torque of 160 Nm.
