MHD131B-024-PP1-AN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911321590
The Bosch Rexroth Indramat MHD131B-024-PP1-AN is a servo motor from the MHD Synchronous Motors series with a flange size of 260 mm and a centering diameter of 250 mm. It features a keyed shaft with a shaft seal and uses liquid cooling for the housing. The motor provides continuous torque at standstill of 48.0 Nm and includes a holding brake rated at 100 Nm. It has absolute position detection and comes with a digital servo feedback encoder.
Internal Product Review
The MHD131B-024-PP1-AN is a synchronous servo motor from Bosch Rexroth Indramat featuring liquid cooling and a keyed shaft with shaft seal for enhanced operational reliability. This model provides 48.0 Nm continuous torque at standstill and includes a holding brake rated at 100 Nm, making it well-suited for demanding automation setups. Digital servo feedback with integrated absolute encoder ensures precise position detection over more than 4096 revolutions.
Have a part to sell?
Wake Industrial Warranty
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MHD131B-024-PP1-AN is a servo motor built by Bosch Rexroth Indramat for the MHD Synchronous Motors series. Designed for closed-loop industrial axes, it combines digital servo feedback with an integrated encoder to report precise rotor position to the drive during operation. This arrangement lets the drive compare commanded and actual motion so the axis can remain accurate during acceleration, deceleration, and holding. The unit follows motor size 131 geometry and length code B, giving a compact yet high-power frame suitable for presses, gantries, and packaging stations. Its power cable exits toward side A for cabinet-side routing, and a shaft seal is fitted to help block coolant or dust from entering the bearing chamber.
At standstill, the motor can deliver a continuous torque of 48.0 Nm, which helps it support steady loads without immediate thermal overload. Installation uses a centering diameter of 250 mm and a square flange measuring 260 mm across, allowing rigid attachment to large machine interfaces. The flange dimensions also spread the mounting load across a broad face, which helps maintain alignment on heavy assemblies. Heat generated by the windings is removed through liquid cooling, which helps stabilize temperature during sustained operation. Winding code 024 sets the electrical characteristics expected by the matching drive.
The integrated holding brake supplies 100 Nm of static torque, so the shaft can remain locked when power is removed. Electrical power reaches the stator through an output connector, keeping the motor connection compact at the housing. Torque is transmitted through a keyed shaft, which helps prevent slippage during reversing or heavily loaded motion. Position data are provided as absolute feedback over more than 4096 revolutions, so the drive can recover position after shutdown without a homing cycle.
