MHD131B-024-PP0-BN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911291287
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
53 Seconds
The Bosch Rexroth Indramat MHD131B-024-PP0-BN is a servo motor from the MHD Synchronous Motors series with a continuous torque at standstill of 48.0 Nm and a liquid-cooled housing. It features a keyed shaft with a shaft seal, a centering diameter of 250 mm, and a 260 mm flange size. The motor uses digital servo feedback with an integrated encoder for absolute position detection of over 4096 revolutions and does not include a holding brake.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MHD131B-024-PP0-BN is a servo motor produced by Bosch Rexroth Indramat and supplied within the MHD Synchronous Motors series. It converts controlled electrical input from a drive into precise rotational motion for automated axes, conveyors, and processing equipment in industrial plants. This model belongs to motor size 131 and uses integrated digital feedback so that the linked drive controller can close position and velocity loops without external sensors. Because the feedback system is built into the motor, the installation can remain compact and the control loop can respond quickly to changing load conditions during normal machine operation.
The motor seats against mounting hardware on a centering pilot of 250 mm, which keeps the stator concentric with the driven load. A flange pattern that measures 260 mm provides the bolt pattern for secure mechanical attachment. At standstill, the electromagnetic system can deliver 48.0 Nm of continuous torque, which helps the motor start or hold loads without excessive heat rise. Power enters through an output connector on side B, which can simplify cable routing when space is limited on the opposite face. The motor frame is classified as size 131, indicating the overall stator diameter used for this housing. This layout supports rigid machine mounting and helps maintain shaft alignment when the motor is coupled to a gearbox or other driven element.
A closed coolant jacket removes heat through liquid cooling, which supports stable thermal performance during sustained duty cycles, even though the unit is supplied without a holding brake. Position data come from absolute feedback with more than 4096 revolutions, so multi-turn position information remains available after power loss. The drive shaft uses a keyed shaft design and includes a shaft seal, which supports torque transfer while helping contain lubricant and block contaminants. Electrical characteristics follow winding code 024, allowing the paired inverter to match its current and voltage behavior to the motor winding. The connector arrangement also allows the power interface to be separated cleanly from the mechanical mounting area, which helps keep surrounding machine components accessible.
Frequently Asked Questions about MHD131B-024-PP0-BN:
Q: What type of cooling is used in the MHD131B-024-PP0-BN servo motor?
A: This model uses liquid cooling for efficient heat management during operation.
Q: What is the shaft design of the MHD131B-024-PP0-BN motor?
A: The shaft on this motor is keyed and includes a shaft seal for added protection.
Q: What kind of encoder does the MHD131B-024-PP0-BN use?
A: The encoder is a digital servo feedback type with an integrated encoder for position detection.
Q: Is the MHD131B-024-PP0-BN delivered with a holding brake?
A: This model does not come equipped with a holding brake from the manufacturer.
Q: What type of position detection does the MHD131B-024-PP0-BN offer?
A: The MHD131B-024-PP0-BN provides absolute position detection for more than 4096 revolutions.
