MHD131B-024-PG0-BN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911311235
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
56 Seconds
The Bosch Rexroth Indramat MHD131B-024-PG0-BN is a servo motor in the MHD Synchronous Motors series, featuring a plain shaft with a shaft seal and a flange size of 260 mm. It provides continuous torque at standstill of 48.0 Nm, uses liquid cooling, and operates with protection class IP65. The motor includes digital servo feedback with an integrated encoder for absolute position detection and functions within an ambient temperature range of 0 to 40 °C.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MHD131B-024-PG0-BN is a servo motor produced by Bosch Rexroth Indramat within the MHD Synchronous Motors series. It is designed to supply controlled rotary motion to automated machinery where closed-loop performance and compact power density are required. As a servo motor, it works with a compatible drive controller to position axes quickly and repeatably, providing the mechanical output needed for packaging lines, gantry systems, or metal-cutting equipment.
The motor can produce a continuous standstill torque of 48.0 Nm, supplying stable holding force for axes that must remain energized at zero speed. Heat generated at this load is removed through an integrated jacket that provides liquid cooling, allowing the windings to stay within the Class F insulation limit. The enclosure carries a IP65 rating, so dust ingress and water jets do not compromise operation. Position data is generated by optical measurement with digital servo feedback based on an absolute scale exceeding 4096 revolutions, and the closed-loop accuracy reaches ± 0.5 angular minutes. A plain shaft directs torque into the coupling, and power is routed through an output connector on side B. The motor uses winding code 024 with motor size 131 and length code B. It does not include a holding brake and can be installed up to 1000 m above mean sea level.
The mounting interface uses a centering diameter of 250 mm with a 260 mm square flange that keeps alignment repeatable during installation. The flange also supports the stator mass and provides thermal contact with the machine frame. During operation, the unit may be run in ambient air from 0 to 40 °C. It can be stored or shipped between -20 to +80 °C without damage to the magnets or encoder electronics. A shaft seal is present to protect the bearings when aggressive coolants are present. The plain shaft accepts shrink-fit couplings.
Frequently Asked Questions about MHD131B-024-PG0-BN:
Q: What type of housing cooling does the MHD131B-024-PG0-BN motor use?
A: This model uses liquid cooling to efficiently manage heat during operation.
Q: What kind of shaft design is used on the MHD131B-024-PG0-BN motor?
A: The MHD131B-024-PG0-BN features a plain shaft with a shaft seal for reliable transmission and protection from contaminants.
Q: What is the continuous torque at standstill for the MHD131B-024-PG0-BN?
A: This motor provides a continuous torque of 48.0 Nm at standstill for sustained load applications.
Q: What type of encoder feedback is provided by the MHD131B-024-PG0-BN motor?
A: The encoder integrated in this model supports digital servo feedback with absolute position detection over more than 4096 revolutions.
Q: What level of ingress protection does the MHD131B-024-PG0-BN provide?
A: The degree of protection for the MHD131B-024-PG0-BN is IP65, ensuring it is dust-tight and protected against water jets.
