MHD115C-059-PP0-BA Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911299262
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
7 Minutes
28 Seconds
The Bosch Rexroth Indramat MHD115C-059-PP0-BA is a servo motor in the MHD Synchronous Motors series with a continuous torque at standstill of 70.0 Nm and a keyed shaft design. It features IP65 protection, insulation class F, and digital servo feedback with integrated encoder supporting absolute position detection. The motor uses natural convection cooling and has a flange size of 192 mm without a holding brake.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MHD115C-059-PP0-BA is a servo motor built by Bosch Rexroth Indramat for the MHD Synchronous Motors series. Intended for coordinated motion axes in packaging, printing, and material-handling cells, it converts electrical power from an Indramat drive into regulated rotary motion. Its internal position sensor uses optical measurement to deliver absolute feedback for more than 4096 revolutions, allowing the controller to know the rotor angle immediately after power-up without a homing cycle. This supports applications that require controlled acceleration, precise speed regulation, and repeatable positioning during long operating cycles.
The motor develops a continuous standstill torque of 70.0 Nm, supplying stable holding torque and low-speed drive force without thermal overrun; this is supported by its F-class insulation and winding code 059 stator design. A protection rating of IP65 seals the housing against dust ingress and water jets, allowing installation in processing zones where washdown cleaning is common. Its centering diameter of 180 mm and flange size of 192 mm provide the mechanical interface for rigid coupling to gearboxes or machine frames. Feedback is provided by a digital servo encoder integrated into the rear housing, and the keyed shaft transmits torque directly. Power leads exit on side B through an output connector, and motor size 115 with length code C supports continuous duty within an ambient range of 0 to 40 °C.
Heat is removed by natural convection, so the motor can be mounted without external fans and without a separate airflow supply. Full performance is available at installation heights up to 1000 m above MSL. When the machine is idle or in transit, the unit may be stored between -20 to +80 °C without degrading winding insulation. Integrated servo feedback keeps composite positioning error within ± 0.5 angular minutes, which suits indexing tables and other axes that require repeatable alignment. A shaft seal helps prevent lubricant egress, and the motor is supplied without a holding brake to reduce rotational drag in gravity-balanced axes.
Frequently Asked Questions about MHD115C-059-PP0-BA:
Q: What is the continuous torque at standstill for the MHD115C-059-PP0-BA motor?
A: This model provides a continuous torque of 70.0 Nm when at a standstill.
Q: What type of shaft is included on the MHD115C-059-PP0-BA servo motor?
A: The MHD115C-059-PP0-BA features a keyed shaft, allowing for secure coupling with compatible drive elements.
Q: What is the IP protection rating of the MHD115C-059-PP0-BA servo motor?
A: The degree of protection is rated at IP65, which means it is dust-tight and protected against low-pressure water jets.
Q: What type of position feedback does the MHD115C-059-PP0-BA motor provide?
A: The integrated encoder on this servo motor provides absolute position feedback for over 4096 revolutions.
Q: How is the MHD115C-059-PP0-BA motor cooled during operation?
A: This motor operates with natural convection cooling through its housing, requiring no additional fans.
