COVID-19 Update: Wake Industrial is open and available to support your automation needs.
Rexroth MHD synchronous motors are characterized by operations free from maintenance as well as operational reliability of high degree. Some motors ought to be provided with pressurized media like hydraulic oil, cooling lubricant, compressed air, and cooling fluid that comes from external systems. However, proper handling of the connections as well as the supply of the pressurized systems is recommended so as to avoid injuries or even accidents. If the external supply systems or supply connections are handled improperly, they can also cause material damage.
The MHD synchronous motors have unique type codes which describe them. They also have varying continuous torques when at standstill position. Additionally, the centering diameters of these motors vary with their flange sizes. There are two designs of the output shafts for these motors. They include plain shaft and shaft with keyway. Each motor in the series of MHD motors can have either of the two output shaft designs. Furthermore, these motors can have optional holding brakes. The holding brake is needed in a case where a machine is de-energized to clamp its servo axis. The MHD synchronous motors have different housings depending on their type of cooling. These housing types include natural convection and liquid cooling.
The MHD115C-058 motor has a frame size of 115. The length of its frame is C. In addition, its winding code is 058. This motor has a mass of 55 kg and a theoretical max torque of 231. Again, this permanent magnet-excited motor is widely used for packaging, handling, textiles, machine tools, and many more. The fully sealed housing of the MHD115C-058 motor is entirely covered with a solid coating for protection purposes. This motor can run at a maximum speed of 6000 min. Moreover, this motor should be operated at a peak current of 371 A.
|Motor Frame Size:||192mm Flange Size, 180mm Centering Diameter|
|Motor Frame Length:||70.0 Nm|
|Motor Encoder:||Factory Assigned|
|Output Shaft:||Factory Assigned|
|Holding Brake:||Factory Assigned|
|Output Direction of Power Connector:||Factory Assigned|
|Housing Type:||Factory Assigned|
Wake Industrial sells new surplus and reconditioned products. This website is not sanctioned or approved by any manufacturer or tradename listed. Wake Industrial is not an authorized distributor or representative for the listed manufacturers. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.
Copyright 2020 - Wake Industrial - All Rights Reserved