MHD115C-035-PG1-BN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911327597
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
49 Seconds
The Bosch Rexroth Indramat MHD115C-035-PG1-BN is a servo motor that is part of the MHD Synchronous Motors series. It features a continuous torque at standstill of 70.0 Nm and uses liquid cooling for the housing. This model comes with a plain shaft and an integrated digital servo feedback encoder for absolute position detection over more than 4096 revolutions.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MHD115C-035-PG1-BN is a servo motor produced by Bosch Rexroth Indramat as part of the MHD Synchronous Motors series. Within automated machine tools, material-handling gantries, and similar motion axes, the unit supplies controlled rotary power to a coupled load while feeding back precise position data to the drive controller. Its integrated encoder enables closed-loop operation so that speed and angle remain synchronized with programmed motion profiles in industrial automation cells.
The mechanical interface includes a centering pilot of 180 mm, allowing concentric alignment to the host machine, and a square flange measuring 192 mm on each side for standardized mounting. During continuous stall conditions, the motor can sustain 70.0 Nm of torque without exceeding thermal limits. Thermal energy is removed through liquid cooling passages inside the housing, which helps keep the winding insulation within class F limits under heavy load. Power leads exit the stator casing on side B through an output connector, which helps simplify cable routing in tight cabinets. The motor uses winding code 035, which corresponds to the electrical values expected by compatible Indramat drive inverters. Digital servo feedback with an integrated encoder supplies real-time velocity and position data to the controller for tight regulation.
A holding brake is factory-installed to help prevent drift on suspended loads when the machine is disabled. The drive end uses a plain shaft to mate with couplings or pulleys, and a shaft seal helps block coolant or dust from entering the bearing cavity. Absolute position detection of more than 4096 revolutions eliminates the need for homing after power loss. With a motor size 115 stator and the medium C length stack, the unit provides high torque capacity while keeping installation depth within the expected envelope for MHD series liquid-cooled motors.
Frequently Asked Questions about MHD115C-035-PG1-BN:
Q: What is the continuous torque at standstill of the MHD115C-035-PG1-BN motor?
A: This motor features a continuous torque at standstill of 70.0 Nm.
Q: What encoder type does the MHD115C-035-PG1-BN utilize?
A: The MHD115C-035-PG1-BN uses digital servo feedback with an integrated encoder for position detection.
Q: What type of cooling does the MHD115C-035-PG1-BN motor use?
A: This model is equipped with liquid cooling for the housing.
Q: Does the MHD115C-035-PG1-BN motor have a holding brake and what is its torque?
A: The MHD115C-035-PG1-BN includes a holding brake with 70.0 Nm holding brake torque.
Q: What is the power connection type and direction on the MHD115C-035-PG1-BN?
A: The power connection for this unit is via an output connector directed to side B.
