MHD115C-035-PG0-AN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911306475
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
23 Seconds
The Bosch Rexroth Indramat MHD115C-035-PG0-AN is a servo motor from the MHD Synchronous Motors series, featuring a continuous torque at standstill of 70 Nm and a flange size of 192 mm. It has liquid cooling, an IP65 degree of protection, and a digital servo feedback encoder with optical measurement. The motor is rated for operation between 0 and 40 degrees Celsius and has a plain shaft with a shaft seal.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MHD115C-035-PG0-AN is a servo motor produced by Bosch Rexroth Indramat within the MHD Synchronous Motors series. It is intended for closed-loop industrial automation axes where precise rotary positioning and high stall torque are required. By integrating digital servo feedback and an absolute position detector that resolves more than 4096 revolutions, the unit supplies real-time rotor data to the drive controller for smooth speed control and repeatable path corrections. This feedback arrangement also lets the axis recover position information immediately after power-up, which supports accurate motion in indexing and transfer applications.
The motor delivers a continuous standstill torque of 70.0 Nm, allowing machine tables or press rams to remain energized without additional gearing. A sealing system rated at IP65 shields the windings against dust and water jets, while internal channels support liquid cooling so thermal drift is minimized during prolonged duty cycles. Positional repeatability is aided by an optical measurement method that limits composite error to ± 0.5 angular minutes. The mounting flange measures 192 mm, giving the housing a rigid interface to machine plates and gearbox faces. Power enters on side A through an output connector, leaving unrestricted clearance on the opposite end for the plain shaft, and a shaft seal is fitted even though the unit is supplied without a holding brake.
Reliable operation is permitted in ambient temperatures from 0 to 40 °C, while storage from −20 to 80 °C helps protect insulation when the machine is idle. The centering diameter is 180 mm, which simplifies concentric alignment during installation, and the C-length housing fits within the size 115 mechanical envelope. Class F insulation permits winding temperatures up to 155 °C, and the motor can be used at installation sites up to 1000 m above mean sea level without derating. The electrical circuit uses winding code 035, so compatible drives can match current control to the motor's electrical characteristics.
Frequently Asked Questions about MHD115C-035-PG0-AN:
Q: What is the continuous torque at standstill for the MHD115C-035-PG0-AN motor?
A: The MHD115C-035-PG0-AN motor provides a continuous torque at standstill of 70.0 Nm.
Q: What type of housing cooling does the MHD115C-035-PG0-AN use?
A: This model is equipped with liquid cooling for efficient thermal management during operation.
Q: What type of encoder does the MHD115C-035-PG0-AN motor have?
A: Position feedback on this servo motor is provided via a digital servo feedback system with an integrated encoder.
Q: What is the shaft design of the MHD115C-035-PG0-AN motor?
A: The shaft on the MHD115C-035-PG0-AN features a plain design with a shaft seal for added protection.
Q: What degree of protection does the MHD115C-035-PG0-AN motor offer?
A: The IP65 rating ensures the motor is protected against dust and low-pressure water jets.
