Product Description:

The MHD115C-024-PP1-BA is a servo motor manufactured by Bosch Rexroth Indramat and supplied within the MHD Synchronous Motors series. As a rotary actuator for industrial automation, it converts drive current from a compatible controller into precisely regulated mechanical torque and speed. This supports accurate starts, stops, and speed changes on automated axes. The motor follows the 115 frame code and uses housing length C, giving machine builders a compact yet high-torque option for positioning tasks such as gantry axes, handling modules, or packaging spindles.

At standstill, the motor can deliver a continuous torque of 70.0 Nm, allowing it to hold or move heavy loads without thermal overload when the shaft is locked by control logic. Positioning accuracy is assisted by digital servo feedback, which sends rotor data to the drive for closed-loop current, speed, and position control. Mechanical mounting uses a centering diameter of 180 mm and a flange square of 192 mm, which help align the motor concentrically with driven equipment for repeatable installation. Heat generated in the windings is removed through natural convection, so no external blower or liquid line is required.

For power wiring, the molded output connector faces on side B, giving panel builders a predictable route for flexible motor cables. The rotor transmits torque through a keyed shaft, which resists slip under bidirectional loading and fits standard hub components. A shaft seal is fitted to help guard against oil or dust ingress, and the internal holding brake secures the shaft for vertical axes or emergency stop conditions. Rotor position is captured by an absolute encoder with more than 4096 revolutions measuring system, removing the need for homing cycles after power loss. The electromagnetic characteristics follow winding code 024, which sets the phase resistance and inductance values expected by Rexroth drives so the motor can reach rated torque quickly while staying within controller current limits.