Product Description:

The MHD115C-024-PP0-BA is a servo motor manufactured by Bosch Rexroth Indramat within the MHD Synchronous Motors series. It is used on packaging machines, gantry axes, and transfer stations to deliver regulated rotary motion that follows drive-controller commands with tight torque and position control. This motor is suitable for applications that require repeatable acceleration, controlled deceleration, and stable positioning through frequent machine cycles.

This model provides a continuous standstill torque of 70.0 Nm, giving machinery a steady holding or low-speed force without overheating. Heat is removed through natural convection, so no external blower or liquid circuit is required. A centering diameter of 180 mm aligns the motor face to the mounting plate, while the 192 mm square flange provides the bolt pattern for rigid attachment. The output uses a keyed shaft to reduce the risk of slip under rapid acceleration, and integrated digital servo feedback allows the drive to read position and velocity directly from the encoder. Size code 115 and length code C indicate the frame geometry and housing depth, while power conductors exit toward side B through an output connector. The motor is supplied without a holding brake, which suits systems that use an external clamping device or drive-controlled holding torque.

A sealed front bearing region is maintained by a shaft seal, which helps limit the ingress of coolant spray or dust in food processing and machining lines. Absolute position tracking over more than 4096 revolutions is provided as absolute (>4096 revolutions), so the control system can retain multi-turn position information after power is restored. The stator uses winding code 024, matching the torque constant and back-EMF profile expected by compatible Indramat drive modules. This combination supports stable thermal operation and keeps motor integration straightforward when the axis layout requires side-B power cable routing.