Product Description:

The MHD115C-024-PG0-BA is a servo motor produced by Bosch Rexroth Indramat for the MHD Synchronous Motors series. Intended for precision motion control, the unit supplies regulated torque and closed-loop position feedback to automated handling lines, machining centers, and assembly equipment. Its winding code 024 is matched to compatible Rexroth drives, and the integrated digital servo feedback encoder converts mechanical displacement into electrical data for the position loop. By combining a permanent-magnet rotor with a plain shaft interface, the motor functions as the actuating element in multi-axis industrial systems.

A centering diameter of 180 mm and a flange size of 192 mm establish the mounting geometry and help keep the stator aligned with connected machine elements. The motor uses frame size 115 and length code C, which place it in the larger portion of the MHD range for applications that need higher torque density. It can deliver a continuous standstill torque of 70.0 Nm, giving the axis steady force during holding or slow-speed travel. The housing is sealed to IP65, which helps protect internal parts from dust and water jets. Cooling is handled by natural convection, so no external blower is required. Power exits through a connector on side B, and the plain shaft includes a seal to limit lubricant migration.

The motor uses an optical measurement method that provides absolute position information over more than 4096 revolutions and maintains a system precision of ± 0.5 angular minutes. Its insulation system is rated F, allowing the windings to operate within the intended thermal class during normal use. The permitted operating ambient range is 0 to 40 °C, while transport and storage are allowed from -20 to +80 °C without demagnetization. Service altitude is limited to 1000 m above sea level so convective cooling remains effective. Because the model is supplied without a holding brake, the load must be secured by external clamping or by drive torque when power is removed.