Product Description:

The MHD115C-024-PG0-AA is a servo motor manufactured by Bosch Rexroth Indramat for the MHD Synchronous Motors series. It is intended for axis control in automated machinery where precise torque and position regulation are required. By combining synchronous motor dynamics with a built-in feedback system, the unit provides closed-loop motion suitable for packaging equipment, transfer lines, and general handling stations in industrial automation. Its integrated feedback arrangement also helps reduce the number of separate motion components mounted on the axis.

At standstill, the motor can sustain a continuous torque of 70.0 Nm, allowing the drive to hold heavy loads without overheating. Position monitoring is handled through digital servo feedback integrated inside the housing, so a separate encoder installation is unnecessary. Heat is removed by natural convection, eliminating the need for forced-air or liquid cooling hardware. The motor has a C length code and a frame size of 115, which helps match the stator package to available mounting space. Power leads exit toward side A of the housing, and the motor is supplied without a holding brake, so external means must secure the load during power loss. A shaft seal is present to limit ingress at the output end.

Mechanical energy is delivered through a plain shaft, which avoids keyway stress concentrations when shrink-fit or clamp couplings are used. Absolute position data over more than 4096 revolutions is provided by the internal sensor, identified as absolute (>4096 revolutions), which simplifies homing routines after power cycling. Power wiring terminates through an Output Connector, and winding code 024 identifies the electrical resistance and inductance pairings expected by the drive controller. This arrangement works well in direct-coupled servo axes that require repeatable position information during frequent operating cycles.