MHD115C-024-NP1-BA Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911287165
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
26 Seconds
The Bosch Rexroth Indramat MHD115C-024-NP1-BA is a servo motor from the MHD Synchronous Motors series with a continuous torque at standstill of 70.0 Nm and a natural convection cooling system. It features a keyed shaft with shaft seal, an IP65 protection rating, and digital servo feedback encoder for position detection. The motor also includes a holding brake with 70.0 Nm torque and uses an output connector for power connection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MHD115C-024-NP1-BA is a servo motor produced by Bosch Rexroth Indramat as part of the MHD Synchronous Motors series. With a motor size of 115 and a length code of C, the unit uses a keyed shaft with an integrated shaft seal to transmit torque while limiting contaminant ingress. As a servo motor, it converts drive current into controlled mechanical motion for precise acceleration, speed regulation, and positioning in automated machinery and handling systems. Its integrated layout suits machine axes that require repeatable motion in packaging, transfer, and general automation equipment.
At standstill, it can deliver a continuous torque of 70.0 Nm, allowing the motor to support substantial axis loads without overheating. The motor is sealed to IP65, which helps keep dust and water jets away from internal components. This level of sealing allows the housing to be mounted outside cabinets when the surrounding application permits. Rotor position is measured by digital servo feedback that uses the high-speed HSF format, and the optical system supplies relative position data to the drive controller. With a system accuracy of ± 0.5 angular minutes, the unit supports fine contouring and stable position control. The windings use Class F insulation, which permits winding temperatures up to 155 °C, and the output connector faces side B to help keep cable routing clear of the working envelope. The thermal design is intended for continuous operation in ambient temperatures from 0 to 40 °C when the motor is used within its rated conditions.
For storage, the unit tolerates temperatures from -20 to +80 °C, and it can be installed at elevations up to 1000 m above mean sea level without derating. The mounting flange measures 192 mm and uses a 180 mm pilot diameter for accurate alignment on the machine face. Cooling is provided by natural convection, so no external fan or liquid circuit is required. A 70 Nm holding brake is included to keep vertical axes secured when power is off. This brake supports applications where the load must remain in place after drive power is removed.
Frequently Asked Questions about MHD115C-024-NP1-BA:
Q: Does the MHD115C-024-NP1-BA servo motor feature a holding brake?
A: This model includes a holding brake with a torque of 70.0 Nm.
Q: What is the degree of protection for the MHD115C-024-NP1-BA motor?
A: The MHD115C-024-NP1-BA motor is protected to IP65 standards against dust and low-pressure jets of water from any direction.
Q: What type of encoder is used on the MHD115C-024-NP1-BA servo motor?
A: Position feedback is provided through digital servo feedback (HSF) utilizing an optical measurement method.
Q: What is the flange size of the MHD115C-024-NP1-BA motor?
A: The flange on this motor measures 192 mm in size.
Q: What type of housing cooling is present on the MHD115C-024-NP1-BA motor?
A: This model uses natural convection, which cools the housing without external fans.
