MHD115C-024-NP0-AN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911285513
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
8 Seconds
The Bosch Rexroth Indramat MHD115C-024-NP0-AN is a servo motor from the MHD Synchronous Motors series featuring a continuous torque at standstill of 70.0 Nm and insulation class F. This motor is equipped with liquid cooling, a keyed shaft with a shaft seal, and has a degree of protection rated at IP65. It uses a digital servo feedback encoder and supports an ambient operating temperature range from 0 to 40 °C.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MHD115C-024-NP0-AN is a servo motor manufactured by Bosch Rexroth Indramat for the MHD Synchronous Motors series. Built around frame size 115 with length code C, it works with a digital drive controller to provide closed-loop positioning and velocity regulation, converting electrical energy into controlled mechanical rotation for production lines, pick-and-place axes, and tooling stations. A liquid-ready housing and sealed interfaces make the unit suitable for installations where high power density and protection against shop-floor contamination are required. This motor format is well suited to axes that must combine repeatable motion with steady torque during frequent starts, stops, and low-speed operation.
At standstill, the motor can sustain a continuous torque of 70.0 Nm, giving the axis stable output during static holding and low-speed interpolation. Its enclosure has an IP65 rating, which helps keep dust and low-pressure water jets away from internal live and rotating parts. Position feedback is provided by Digital servo feedback (HSF), an optical relative encoder system that supports fast signal processing in the connected drive. A liquid jacket around the stator provides liquid cooling, removing heat without external fans and helping the motor maintain output across an operating range of 0 to 40 °C. With a system accuracy of ± 0.5 angular minutes, the motor supports precise positioning on compact multi-axis machines where repeatability is important.
The mechanical interface uses a centering pilot of 180 mm with a 192 mm square flange, allowing accurate alignment to matching machine faces. The keyed shaft includes a shaft seal that helps limit oil splash from a connected gearbox, and the motor is supplied without a holding brake, so external holding force is required when the axis is stopped. Wiring exits on side A through an output connector, and the stator windings use code 024 for compatibility with matching drives. Class F insulation withstands winding temperatures up to 155 °C, the motor can be installed up to 1000 m above mean sea level without derating, and storage from -20 to +80 °C is permitted before installation.
Frequently Asked Questions about MHD115C-024-NP0-AN:
Q: What type of shaft does the MHD115C-024-NP0-AN motor feature?
A: This model uses a keyed shaft design, offering secure torque transmission.
Q: What is the cooling method used in the MHD115C-024-NP0-AN motor?
A: The motor uses liquid cooling for temperature management during operation.
Q: What is the continuous torque at standstill for the MHD115C-024-NP0-AN?
A: The MHD115C-024-NP0-AN provides a continuous standstill torque of 70.0 Nm.
Q: What type of encoder does the MHD115C-024-NP0-AN use?
A: This model is equipped with digital servo feedback (HSF) for position referencing.
Q: What is the degree of protection for the MHD115C-024-NP0-AN motor?
A: The MHD115C-024-NP0-AN is rated at IP65, making it dust-tight and protected against water jets.
