MHD115B-024-PP0-LA Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911293228
The Bosch Rexroth Indramat MHD115B-024-PP0-LA is a servo motor from the MHD Synchronous Motors series. It features a continuous standstill torque of 50.0 Nm, a keyed shaft with a shaft seal, and natural convection housing cooling. The motor provides IP65 degree of protection and has digital servo feedback with an integrated encoder for absolute position detection over more than 4096 revolutions.
Internal Product Review
The MHD115B-024-PP0-LA is a well-engineered Bosch Rexroth Indramat servo motor with natural convection cooling. Digital servo feedback with an integrated encoder and absolute position detection above 4096 revolutions support accurate, stable motion control. Continuous standstill torque of 50.0 Nm makes the motor a strong choice for demanding servo applications.
Have a part to sell?
Wake Industrial Warranty
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MHD115B-024-PP0-LA is a permanent-magnet servo motor manufactured by Bosch Rexroth Indramat and positioned within the MHD Synchronous Motors series. As a closed-loop drive element, it converts electrical power from an IndraDrive controller into precise mechanical rotation for positioning and velocity tasks on packaging lines, handling robots, and machine tools. Integrated digital servo feedback continuously reports rotor position, letting the controller synchronize motion with high accuracy while the shaft transmits torque directly into the machine drivetrain.
Its mechanical output is rated at a continuous standstill torque of 50.0 Nm, giving axes adequate holding force without overheating. Installation is simplified by a 180 mm centering diameter that seats the flange concentrically against gearboxes. An enclosure rating of IP65 prevents dust ingress and withstands low-pressure washdown, so additional guarding is seldom necessary. Thermal energy leaves the stator by natural convection, which means airflow around the ribbed housing is sufficient under full load. All components are specified for reliable service within an ambient range of 0 to 40 °C. Because the power connector is oriented to the left, cabling can follow standard machine layouts, and the absence of a holding brake reduces mass where gravity loads are externally restrained.
The motor flange spans 192 mm, matching the size 115 frame code and providing the bolt circle required for heavy-duty mounts. Copper windings are insulated to Class F, providing additional thermal headroom during intermittent peaks, and winding code 024 identifies the electrical winding arrangement. Position data are delivered as Absolute (>4096 revolutions) feedback through an optical measuring method, and total system deviation is limited to ± 0.5 angular minutes. A factory-fitted shaft seal blocks coolant splash, and the keyed shaft eases torque transfer. Storage temperatures range from -20 to +80 °C, installation is permitted up to 1000 m above mean sea level, the motor uses the B length variant, and the power connector is molded.
