MHD115B-024-PG1-AA Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911287357
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
16 Seconds
The Bosch Rexroth Indramat MHD115B-024-PG1-AA is a servo motor from the MHD Synchronous Motors series. It features a continuous torque at standstill of 50.0 Nm, a flange size of 192 mm, and a centering diameter of 180 mm. The motor is equipped with digital servo feedback with an integrated encoder and has a plain shaft design with shaft seal.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MHD115B-024-PG1-AA servo motor is a Bosch Rexroth Indramat unit in the MHD Synchronous Motors series. Intended for industrial automation, it converts regulated electrical energy from a drive controller into controlled mechanical rotation for positioning and velocity tasks on gantries, packaging machines, and material-handling axes. A digital servo feedback unit is built into the motor housing so the controller receives immediate rotor position data without separate external transducers. That feedback helps the drive correct deviations caused by changing load conditions and maintain accurate response during repeated cycles. The motor is suited for axes that need both smooth speed regulation and repeatable positioning over long production runs.
A centering diameter of 180 mm aligns the motor with a matched machine flange, while a face diameter of 192 mm establishes the front mounting footprint. Heat produced in the windings is removed by natural convection, so no external blower or coolant circuit is required. At standstill, the motor can deliver 50.0 Nm of continuous torque for holding and low-speed load control. Power leads exit on side A, which can simplify cable routing when the drive cabinet is positioned along the same side of the machine. Because cooling is passive, surrounding airflow and mounting clearance play an important role in continuous operation. The mounting geometry also supports accurate alignment between the motor and connected mechanical components.
An integrated brake provides 70.0 Nm of static torque to hold the axis when power is removed. This is useful where the load must remain stationary between moves or during a power interruption. The motor uses a plain shaft with a factory-installed seal to help limit lubricant migration and protect the bearing area from contamination. Absolute feedback resolution is listed as absolute (>4096 revolutions), so the controller can retain multi-turn position information through normal operating cycles. Winding code 024 matches the drive voltage table, and the B length in the 115 frame gives the motor a balanced combination of inertia and torque capacity for medium-load applications. The power interface uses an output connector for direct cable attachment and orderly routing at the motor housing.
Frequently Asked Questions about MHD115B-024-PG1-AA:
Q: What is the continuous torque at standstill for the MHD115B-024-PG1-AA motor?
A: The MHD115B-024-PG1-AA motor provides 50.0 Nm of continuous torque at standstill.
Q: Does the MHD115B-024-PG1-AA servo motor have a holding brake?
A: This model is equipped with a holding brake that delivers a holding torque of 70.0 Nm.
Q: What type of position feedback does the MHD115B-024-PG1-AA motor use?
A: A digital servo feedback system with an integrated encoder is used for position detection.
Q: What cooling method is used for the housing of the MHD115B-024-PG1-AA motor?
A: The MHD115B-024-PG1-AA features natural convection housing cooling, operating without external cooling systems.
Q: What kind of shaft design does the MHD115B-024-PG1-AA motor have?
A: This model has a plain shaft design and includes a shaft seal for added protection.
