MHD115B-024-PG0-BA Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911290064
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
37 Seconds
The Bosch Rexroth Indramat MHD115B-024-PG0-BA is a servo motor from the MHD Synchronous Motors series. It provides 50 Nm continuous torque at standstill and has a flange size of 192 mm with a centering diameter of 180 mm. This model uses digital servo feedback with an integrated encoder for absolute position detection over more than 4096 revolutions and operates with natural convection cooling.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MHD115B-024-PG0-BA is a servo motor manufactured by Bosch Rexroth Indramat for the MHD Synchronous Motors series. With motor size 115 and length code B, the unit is suited for medium-to-high torque duties on packaging lines, gantry axes, and other automated equipment that requires stable speed and position control. Winding code 024 gives the motor an electrical resistance and inductance profile that matches the current regulation expected by compatible drive controllers. As a servo motor, it converts commanded electrical input into controlled rotary motion for repeatable indexing, positioning, and speed-regulated operation.
A centering diameter of 180 mm mates with a flange size of 192 mm, giving the motor a rigid mechanical interface that helps minimize runout when it is bolted to a gearbox or machine frame. At standstill, the stator can deliver 50.0 Nm of continuous torque, permitting sustained holding force without overheating under the proper operating conditions. Heat is removed through natural convection, so the housing can operate without forced-air hardware when adequate clearance is provided around the motor. Rotor position is monitored by a digital servo feedback encoder, which allows the drive to track shaft motion precisely during acceleration, steady running, and low-speed correction. Power connections are made through an output connector, and a shaft seal helps keep contaminants away from internal components.
Electrical power enters on side B of the stator, which can simplify cable routing where access is limited on one side of the machine. The plain shaft provides a smooth coupling surface for applications that do not require a keyed or splined connection. For safety, the motor is supplied without a holding brake, so any stationary load must be secured by the drive or by external mechanical restraint. Multi-turn feedback is supported through absolute position measurement exceeding 4096 revolutions, allowing the control system to retain position information after a power interruption.
Frequently Asked Questions about MHD115B-024-PG0-BA:
Q: What is the continuous torque at standstill for the MHD115B-024-PG0-BA motor?
A: This motor provides a continuous torque of 50.0 Nm at standstill, supporting demanding servo applications.
Q: What shaft design does the MHD115B-024-PG0-BA include?
A: The MHD115B-024-PG0-BA is equipped with a plain shaft and includes a shaft seal for extra protection.
Q: What type of encoder is integrated in the MHD115B-024-PG0-BA motor?
A: This model uses digital servo feedback with an integrated encoder for position detection.
Q: What type of position detection does the MHD115B-024-PG0-BA motor offer?
A: Position detection on this motor is absolute and supports more than 4096 revolutions.
Q: Does the MHD115B-024-PG0-BA motor have a holding brake?
A: The MHD115B-024-PG0-BA does not include a holding brake.
