MHD115B-024-NP0-BN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911287180
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
In-Stock, Ships 3-5 Days
The MHD115B-024-NP0-BN Magnet Motor is manufactured by Rexroth Indramat Bosch. This motor has a Winding Code of 24 and has a Digital Motor Encoder. The Driven Shaft for this motor is With Key and it is Not Equipped with a holding brake.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The Bosch MHD115B-024-NP0-BN is an advanced industrial motor. It is a servo motor that supports digital servo feedback. The motor is widely deployed for applications such as handling and automation, machine tools, printing industry and paper industry. Its housing is suited to natural convection and liquid cooling. Technical data for the motor with natural convection at 60K overtemperature are as follows: 50 Nm continuous torque at standstill, 32.3 continuous current at standstill, 2000 RPM rated speed, 17.9 Nm rated torque and 8.2 Amps rated current. Technical data for the motor with natural convection at 100K overtemperature are as follows: 57 Nm continuous torque at standstill, 37.9 continuous current at standstill, 2000 RPM rated speed, 32.3 Nm rated torque and 15.2 Amps rated current. Technical data for the motor with liquid cooling are as follows: 95 Nm continuous torque at standstill, 61.4 continuous current at standstill, 2000 RPM rated speed, 80.3 Nm rated torque and 36.7 Amps rated current.
The characteristic motor speed is 4000 RPM. The maximum motor speed is 4000 RPM. The motor does not feature a holding brake. Location of the power connector is on side B. Main shaft on the MHD115B-024-NP0-BN motor includes a key and a seal. Degree of protection offered by the motor housing is IP65. The insulation class of the motor is F. The housing of the motor is painted matte black. Approximate weight of the motor is 40 kilograms. During transportation the motor should be kept in the horizontal position. The motor flange and shaft should be protected from impacts. A plastic protective sleeve is attached to the shaft, which should only be removed shortly before motor mounting.
