MHD112C-058-PP3-AN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911279424
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
49 Seconds
The Bosch Rexroth Indramat MHD112C-058-PP3-AN is a servo motor from the MHD Synchronous Motors series that features liquid cooling and a keyed shaft design. It has a continuous torque at standstill of 38.0 Nm, a holding brake with 70.0 Nm torque, and IP65 degree of protection. The motor is equipped with digital servo feedback with integrated encoder for absolute position detection over more than 4096 revolutions.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MHD112C-058-PP3-AN servo motor is manufactured by Bosch Rexroth Indramat within the MHD Synchronous Motors series. It provides controlled rotary motion for automated packaging lines, gantry axes, and indexing tables. The motor has size 112 with length code C, and a keyed shaft transfers torque without slip. The power lead exits through an output connector aimed toward side A, which eases cable runs in populated cabinets. This arrangement helps keep the connection area compact and reduces interference with nearby machine components. The design is suitable for closed-loop axes that need repeatable motion during frequent starts, stops, and position changes.
The motor delivers a continuous standstill torque of 38.0 Nm, enabling static holding or low-speed feed without overheating. The housing is sealed to IP65, and heat is removed by liquid cooling so the motor can operate in enclosed machine compartments. Mounting uses a 192 mm square flange that matches common automation gearheads, and operation is permitted in ambient temperatures from 0 to 40 °C. Position data comes from a digital servo feedback encoder with optical rotor-angle detection, and winding code 058 matches the electrical characteristics expected by compatible Indramat drive amplifiers. This feedback arrangement supports stable speed regulation and accurate position control during continuous machine cycles.
For holding and emergency stop scenarios, the integral brake supplies 70.0 Nm of retentive torque, and a shaft seal helps block coolant ingress at the coupling. The servo motor has a centering diameter of 130 mm for repeatable concentric alignment to the driven load. Feedback accuracy is maintained within ± 0.5 angular minutes, and the encoder delivers absolute (>4096 revolutions) position tracking without homing. Class F insulation supports elevated winding temperatures, storage is permitted from -20 to +80 °C, and operation is permitted up to 1000 m above mean sea level. The absolute position signal allows the axis to recover its location after restart without requiring a reference run.
Frequently Asked Questions about MHD112C-058-PP3-AN:
Q: What type of cooling does the MHD112C-058-PP3-AN motor use?
A: This motor features liquid cooling, allowing effective heat dissipation for continuous operation.
Q: What is the shaft design of the MHD112C-058-PP3-AN?
A: The shaft of this model is designed with a key and includes a shaft seal for added protection.
Q: How much torque does the holding brake deliver on the MHD112C-058-PP3-AN?
A: The holding brake on this motor provides a holding torque of 70.0 Nm.
Q: What type of encoder is included in the MHD112C-058-PP3-AN?
A: This motor is equipped with a digital servo feedback encoder with integrated optical position detection.
Q: What is the degree of protection rating for the MHD112C-058-PP3-AN motor?
A: The MHD112C-058-PP3-AN has an IP65 degree of protection, making it dust tight and protected against water jets.
