MHD112C-035-PP3-BN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911291954
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
41 Seconds
The Bosch Rexroth Indramat MHD112C-035-PP3-BN is a servo motor from the MHD Synchronous Motors series with a continuous torque at standstill of 38.0 Nm and a holding brake torque of 70.0 Nm. It features liquid cooling, a keyed shaft with a shaft seal, and digital servo feedback with an integrated encoder for absolute position detection. The motor has a centering diameter of 130 mm and a flange size of 192 mm.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MHD112C-035-PP3-BN is a servo motor manufactured by Bosch Rexroth Indramat and supplied under the MHD Synchronous Motors series. It uses motor size 112 and winding code 035 to match drive controllers intended for medium-inertia loads and moderate base speeds. As a servo element, it converts electrical energy into controlled rotary motion for machining centers, packaging stations, and other axis-controlled equipment where accurate positioning is required. Its operating characteristics also suit applications that demand repeatable starts, stops, and direction changes during continuous machine cycles.
This model delivers a continuous standstill torque of 38.0 Nm, indicating the load it can hold at zero speed while energized. A holding brake rated for 70.0 Nm keeps the shaft from back-driving during power loss on vertical or suspended axes. Heat is removed by liquid cooling, and a flange diameter of 192 mm provides a standardized mounting face for accurate attachment to the machine. The drive end uses a keyed shaft for positive torque transfer, while motor length C and the shaft seal support compact installation and help keep the coupling area protected from contamination.
Dimensional alignment is assisted by a centering diameter of 130 mm, which fits mating register bores and helps control radial runout during installation. Position feedback comes from a digital servo encoder with absolute (>4096 revolutions) capability, so the controller retains position information after power cycles. Power leads exit on side B, and the motor uses an output connector for the power interface. This layout supports orderly cable routing, and the integrated feedback channel supplies real-time rotor position data for stable speed regulation and accurate position tracking.
Frequently Asked Questions about MHD112C-035-PP3-BN:
Q: What type of shaft does the MHD112C-035-PP3-BN motor use?
A: The MHD112C-035-PP3-BN is equipped with a keyed shaft design for secure transmission of torque.
Q: What is the holding brake torque for the MHD112C-035-PP3-BN?
A: This model includes a holding brake rated at 70.0 Nm for reliable position holding.
Q: What cooling method is utilized by the MHD112C-035-PP3-BN motor?
A: The MHD112C-035-PP3-BN uses liquid cooling to regulate its operating temperature during high-performance cycles.
Q: What encoder type and feedback capability does the MHD112C-035-PP3-BN provide?
A: Digital servo feedback with an integrated encoder supports absolute position detection for more than 4096 revolutions.
Q: How much continuous torque at standstill does the MHD112C-035-PP3-BN deliver?
A: The continuous torque at standstill for this motor is specified at 38.0 Nm.
