Product Description:

The MHD112C-035-PP0-AN is a servo motor produced by Bosch Rexroth Indramat as part of the MHD Synchronous Motors series. It converts current from a compatible inverter into controlled rotary motion for positioning tasks, packaging axes, and material-handling gantries. Integrated feedback and a sealed housing place the motor and sensing functions in one assembly, which keeps the package compact for machine installation. This arrangement also lets the drive receive position data without separate external feedback hardware, and it helps reduce the number of external components that must be mounted around the axis.

The motor uses a flange diameter of 192 mm and a centering pilot of 130 mm, which help align the housing on standard machine faces and support accurate mechanical seating. Frame size 112 with length C provides the stator space needed for a continuous standstill torque of 38.0 Nm, allowing the axis to hold steady loads without excessive heat buildup during low-speed or stationary operation. A keyed shaft transfers torque to the driven element, and the installed shaft seal helps keep coolant or lubricant from moving along the shaft journal. These features support stable coupling and help maintain consistent operation in damp or dirty machine areas where splash protection is important.

Position feedback is supplied by an integrated encoder with absolute resolution of more than 4096 revolutions, so the motor can report position again after a power interruption without a homing cycle. Heat is removed through liquid cooling channels in the housing, which supports higher duty cycles than a comparable air-cooled frame and helps carry thermal load away from the stator. The power leads exit through an output connector mounted on side A, which can simplify cable routing in compact machine bases and keep the connection point consistent with the selected motor orientation. The electrical characteristics match winding code 035, and because the motor is supplied without a holding brake, the axis must rely on drive torque or an external clamp when power is off.