MHD112C-035-NG0-AN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911288627
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
1 Seconds
The Bosch Rexroth Indramat MHD112C-035-NG0-AN is a servo motor from the MHD Synchronous Motors series with a continuous torque at standstill of 38.0 Nm and liquid cooling. It features an IP65 protection rating, digital servo feedback encoder, and a flange size of 192 mm. The motor is designed with a plain shaft and insulation class F.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MHD112C-035-NG0-AN is a servo motor produced by Bosch Rexroth Indramat in the MHD Synchronous Motors series. It converts controlled current from the drive into synchronous rotary motion, providing regulated torque and speed for industrial axes that demand coordinated positioning, such as gantries, tooling spindles, and transfer stations. As a component in closed-loop automation, it interfaces with digital drive controllers and encoder feedback to maintain commanded motion profiles. Its synchronous operating principle supports stable motion during acceleration, deceleration, and repeated direction changes in automated equipment.
Its continuous torque at standstill reaches 38.0 Nm, allowing stable load holding without overheating during prolonged indexing. A centering diameter of 130 mm and a flange dimension of 192 mm provide the mechanical interface for direct coupling to gearboxes or driven shafts. The enclosure is rated IP65, so it resists dust ingress and low-pressure water jets in industrial settings. Heat is removed through liquid cooling, which supports demanding duty cycles and steady thermal control. Digital servo feedback with relative position detection is obtained optically, while winding code 035 is matched to compatible drive modules. The motor has size 112 with length code C, a plain shaft with a shaft seal, and a power connector on side A with an output plug.
The motor operates in ambient temperatures from 0 to 40 °C, and it can be stored from -20 to +80 °C without damage to its basic operating characteristics. Insulation class F permits winding temperatures up to 155 °C and supports reliable dielectric performance during high current peaks. The feedback system supports an accuracy of ±0.5 angular minutes, which helps the motor follow precise positioning commands in repeatable motion tasks. Installation is permitted up to 1000 m above mean sea level before output derating is required. Because the motor is supplied without a holding brake, vertical axes must rely on external locking devices or commanded drive torque when power is removed.
Frequently Asked Questions about MHD112C-035-NG0-AN:
Q: What type of shaft is provided on the MHD112C-035-NG0-AN motor?
A: This model features a plain shaft design for direct coupling to machinery.
Q: What type of encoder and measurement method does the MHD112C-035-NG0-AN use?
A: The MHD112C-035-NG0-AN uses digital servo feedback (HSF) with optical measurement for position detection.
Q: What is the continuous torque at standstill for the MHD112C-035-NG0-AN?
A: This motor provides 38.0 Nm of continuous torque at standstill.
Q: What is the IP protection rating of the MHD112C-035-NG0-AN motor?
A: The MHD112C-035-NG0-AN has a degree of protection rated at IP65.
Q: What type of housing cooling is used in the MHD112C-035-NG0-AN motor?
A: This model is cooled using liquid cooling to manage operating temperatures efficiently.
