Product Description:

The MHD112C-024-PP3-BN is a synchronous motor manufactured by Bosch Rexroth Indramat for the MHD Synchronous Motors series. It uses motor size 112 with length code C and serves as a regulated drive source for industrial axes that require precise torque and speed control. When paired with a compatible drive controller, the motor supports closed-loop motion in pick-and-place robots, printing stations, and conveyor positioning modules. Its synchronous design also supports coordinated acceleration and deceleration in automated systems that run repeated motion cycles.

This motor generates a continuous standstill torque of 38.0 Nm, which allows the axis to hold load at zero speed without overheating. Dimensional integration is supported by a 130 mm centering diameter and a flange diameter of 192 mm, giving a standard mounting interface for machine frames or gearboxes. The centering shoulder helps align the housing with the mating surface for accurate installation. Heat is removed by liquid cooling, so the motor can sustain its thermal load in enclosed installations. The power leads exit through an output connector on side B, and the shaft seal helps limit lubricant migration into the motor interior.

An integrated holding brake provides 70.0 Nm of static torque to secure vertical or indexing loads when drive power is removed. Rotor position is monitored by digital servo feedback with Absolute (>4096 revolutions) capability, so the controller can recover position information after power cycling. This feedback arrangement can reduce the need for a reference move after restart, depending on the control setup. The motor uses winding code 024 to match the electrical characteristics expected by compatible Indramat drives. Mechanical power is transmitted through a keyed shaft, which supports positive torque transfer to couplings and pulleys.