MHD112C-024-PG3-LN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911287750
The Bosch Rexroth Indramat MHD112C-024-PG3-LN is a servo motor from the MHD Synchronous Motors series featuring a continuous torque at standstill of 38.0 Nm, a holding brake with 70.0 Nm of torque, and plain shaft design. It is equipped with digital servo feedback and an integrated encoder for absolute position detection over more than 4096 revolutions, and uses liquid cooling with an IP65 degree of protection.
Internal Product Review
The MHD112C-024-PG3-LN is a Bosch Rexroth Indramat servo motor with liquid cooling and IP65 protection. Digital servo feedback with integrated encoder and absolute position detection above 4096 revolutions support precise motion control. Continuous standstill torque of 38.0 Nm and holding brake torque of 70.0 Nm make the unit a strong choice for controlled axis applications.
Have a part to sell?
Wake Industrial Warranty
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MHD112C-024-PG3-LN servo motor is manufactured by Bosch Rexroth Indramat as part of the MHD Synchronous Motors series. It uses a digital servo feedback encoder that supplies absolute position data for more than 4,096 revolutions, allowing closed-loop control of rotary axes in automated machining centers and material-handling systems. This feedback arrangement lets the drive detect rotor position immediately after startup and supports accurate speed and position regulation during operation. By pairing a plain shaft with an integrated shaft seal, the unit keeps lubricants in and contaminants out while transmitting torque to couplings or gearboxes.
The motor can deliver a continuous standstill torque of 38.0 Nm, and its holding brake supplies up to 70.0 Nm to maintain position when power is removed. A protection rating of IP65 blocks dust and low-pressure water jets, allowing the housing to operate in demanding industrial areas without an added enclosure. The square flange measures 192 mm, matching common motor-mounting patterns. Power connections exit on the left through a molded power connector, which helps keep cable routing orderly. Heat is removed by liquid cooling, which supports higher continuous loads than an air-cooled design. Class F insulation withstands winding temperatures up to 155 °C, and the optical measurement method helps the feedback system maintain accuracy during temperature changes.
Positional repeatability is held within ± 0.5 angular minutes, aided by a centering diameter of 130 mm that seats the motor concentrically on machine frames. The close centering fit helps align the shaft axis with the driven load and can reduce stress on couplings during installation. Storage is allowed from -20 to +80 °C, while operation is specified for 0 to 40 °C. A maximum setup height of 1,000 m above mean sea level is permitted. Size 112 with length code C gives the motor a compact housing for its output class.
