MHD112C-024-PG0-LN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911284548
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
22 Seconds
The Bosch Rexroth Indramat MHD112C-024-PG0-LN is a servo motor from the MHD Synchronous Motors series featuring a centering diameter of 130 mm and a flange size of 192 mm. It provides 38.0 Nm of continuous torque at standstill, uses liquid cooling, and includes a digital servo feedback encoder for absolute position detection over more than 4096 revolutions. The motor has a plain shaft with a shaft seal and its power connection is oriented to the left.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Bosch Rexroth Indramat manufactures the MHD112C-024-PG0-LN. This unit belongs to the MHD Synchronous Motors series and serves as a servo motor for numerically controlled machine axes and general automation tasks. By translating drive current into precise rotary motion, it supplies closed-loop positioning torque to presses, transfer lines, and packaging stations. The motor interfaces with Indramat drive controllers through its integrated encoder to maintain speed and position accuracy. This closed-loop arrangement supports repeatable starts, stops, and speed changes in servo-driven equipment. Its mechanical format follows IEC dimensions, which helps it fit machine layouts built around standardized mounting patterns.
At standstill, the motor can deliver 38.0 Nm of continuous torque, which is the sustained load it can hold without overheating. Heat produced by the stator is removed through liquid cooling, allowing higher current density than air-cooled housings. Mounting uses a centering pilot of 130 mm that aligns the aluminum flange, and the bolt circle spans 192 mm for common machine plates and gearbox interfaces. Position feedback relies on digital servo feedback with an integrated encoder, so the drive receives real-time rotor angle data for rapid correction. The C-length housing and 112 frame size provide the active stack height needed for the rated torque while keeping inertia appropriate for this motor size.
Electrical power reaches the stator through a molded connector with the power connection on the left side, which can simplify cable routing in compact cabinets. The motor has a plain shaft that couples directly to belt pulleys or rigid couplings, and a shaft seal helps limit lubricant migration along that journal. Rotor position is tracked as absolute feedback for more than 4096 revolutions, so the axis can retain multi-turn position information after shutdowns. The stator uses the 024 winding code, which corresponds to the impedance values used for drive current limits. The motor is supplied without a holding brake, so static load retention must be provided externally when the axis is stopped.
Frequently Asked Questions about MHD112C-024-PG0-LN:
Q: What type of cooling does the MHD112C-024-PG0-LN motor use?
A: The MHD112C-024-PG0-LN utilizes liquid cooling for efficient temperature management during high-demand operation.
Q: What is the continuous standstill torque of the MHD112C-024-PG0-LN?
A: This motor provides a continuous torque at standstill of 38.0 Nm, suitable for applications requiring sustained force.
Q: What is the shaft design of the MHD112C-024-PG0-LN motor?
A: A plain shaft design is featured on this model, ensuring direct and simple coupling to mechanical loads.
Q: Does the MHD112C-024-PG0-LN come with a holding brake?
A: The MHD112C-024-PG0-LN does not include a holding brake.
Q: What type of encoder and position detection is used in the MHD112C-024-PG0-LN?
A: The integrated digital servo feedback encoder delivers absolute position detection over more than 4096 revolutions.
