MHD112C-024-NP3-RN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911319625
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
11 Seconds
The Bosch Rexroth Indramat MHD112C-024-NP3-RN is a servo motor from the MHD Synchronous Motors series with a flange size of 192 mm and a centering diameter of 130 mm. It features a continuous torque at standstill of 38.0 Nm and comes equipped with a holding brake providing 70.0 Nm of torque. The motor has liquid cooling, a keyed shaft, and uses digital servo feedback for position detection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MHD112C-024-NP3-RN is a servo motor produced by Bosch Rexroth Indramat within the MHD Synchronous Motors series. Intended for high-performance automation, it converts electrical power from a drive into tightly regulated rotary motion for pressing, gantry, and packaging axes. Its mechanical interfaces match adjacent frame sizes, which helps it fit standardized machine layouts and common mounting patterns. The motor is suited to dynamic axes that require repeatable motion, stable torque output, and predictable response during frequent start-stop cycles.
At standstill, the motor delivers 38.0 Nm continuous torque, giving machines the ability to maintain force on static cuts or clamps without excessive heating. A 130 mm centering diameter aligns the motor concentrically to a gearbox or machine mount, and the 192 mm flange size supports standardized mechanical attachment. Thermal energy is removed through liquid cooling, which permits sustained high current while keeping winding temperature within Class F limits. Rotor angle is monitored by digital servo feedback (HSF), which sends position data to the controller for the velocity and current loops. The housing uses length code C, giving the motor a mid-range inertia, and the power connector is positioned on the right for straightforward cable routing in multi-axis cabinets.
A keyed shaft transmits torque while helping prevent slip under reversing loads, and a shaft seal limits ingress when the motor is installed in washdown or coolant-rich areas. The parking brake provides 70.0 Nm holding brake torque, securing vertical axes during emergency stops or power loss. The design uses motor size 112, placing it in a frame class suited to high-capacity servo applications. Electrical characteristics follow winding code 024, matching the resistance and inductance values expected by the drive. Position evaluation is relative, so a homing move is required after each power cycle before closed-loop production can resume, and this arrangement suits systems that already use a fixed reference position.
Frequently Asked Questions about MHD112C-024-NP3-RN:
Q: What type of encoder does the MHD112C-024-NP3-RN motor use?
A: This model uses digital servo feedback (HSF) as its encoder type.
Q: What cooling method is used for the housing of the MHD112C-024-NP3-RN motor?
A: The housing of the MHD112C-024-NP3-RN is cooled using a liquid cooling system.
Q: How much holding brake torque does the MHD112C-024-NP3-RN motor deliver?
A: The holding brake on the MHD112C-024-NP3-RN provides a torque of 70.0 Nm.
Q: What is the shaft design of the MHD112C-024-NP3-RN motor?
A: The MHD112C-024-NP3-RN motor features a keyed shaft with a shaft seal.
Q: What is the continuous torque at standstill for the MHD112C-024-NP3-RN?
A: This motor offers a continuous torque of 38.0 Nm at standstill.
