MHD112C-024-NP3-BN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911284771
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
53 Seconds
The Bosch Rexroth Indramat MHD112C-024-NP3-BN servo motor is part of the MHD Synchronous Motors series and features liquid cooling and a keyed shaft with a shaft seal. This motor has a continuous torque at standstill of 38 Nm and is equipped with a digital servo feedback encoder. It includes a holding brake capable of 70 Nm and uses a side B output connector for power connection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MHD112C-024-NP3-BN is a servo motor manufactured by Bosch Rexroth Indramat and assigned to the MHD Synchronous Motors series. It serves as an electromechanical drive element that converts command currents from an Indramat controller into precisely metered rotary motion for machine tools, packaging stations, and automated material-handling axes. By integrating permanent-magnet excitation with closed-loop current regulation, the unit delivers repeatable torque so coupled loads accelerate, decelerate, and hold position according to the programmed profile. This operating behavior suits coordinated axes that require quick response during interpolation, indexing, and repeated start-stop motion.
As a mechanical prime mover, the motor sustains a continuous stall torque of 38.0 Nm, allowing static load support without exceeding thermal limits. Internal channels provide liquid cooling, so full torque can be maintained during high duty cycles and heat can be carried away more effectively than with passive cooling alone. Rotor position is monitored through digital servo feedback (HSF), enabling the drive to interpolate fine angle increments for smooth motion. A factory-installed brake supplies 70.0 Nm of holding torque to secure vertical or indexing axes when power is removed. The motor uses winding code 024, which gives electrical characteristics matched to compatible power stages, and power is delivered through an output connector for straightforward connection.
Physical dimensions correspond to frame size 112 and length code C, giving a housing diameter and stack height accepted by standard Indramat mounting flanges. Mechanical coupling is through a keyed shaft, and a shaft seal is fitted to limit dust, oil, or coolant ingress during operation. Motion feedback is based on relative position detection, so the axis is homed at startup before closed-loop operation begins. Motor leads exit toward side B of the housing, which can simplify cable routing when the machine layout places wiring away from moving tooling.
Frequently Asked Questions about MHD112C-024-NP3-BN:
Q: What is the continuous torque at standstill for the MHD112C-024-NP3-BN motor?
A: This model provides a continuous torque of 38.0 Nm at standstill.
Q: What type of encoder is included with the MHD112C-024-NP3-BN motor?
A: The MHD112C-024-NP3-BN features digital servo feedback (HSF) for position control.
Q: Is a holding brake included on the MHD112C-024-NP3-BN, and what is its torque?
A: A holding brake is standard on this motor, with a holding brake torque of 70.0 Nm.
Q: What type of housing cooling system does the MHD112C-024-NP3-BN use?
A: This servo motor utilizes liquid cooling for its housing.
Q: Where is the power connection located on the MHD112C-024-NP3-BN servo motor and what type does it use?
A: The power connection is an output connector positioned on side B of the unit.
