MHD112B-035-PG0-AN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911295314
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
57 Seconds
The Bosch Rexroth Indramat MHD112B-035-PG0-AN is a servo motor that is part of the MHD Synchronous Motors series. It features liquid cooling, a plain shaft with sealing, and a centering diameter of 130 mm. The motor delivers a continuous torque at standstill of 28.0 Nm, has IP65 protection, and uses digital servo feedback with an integrated encoder for absolute position detection over more than 4096 revolutions.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MHD112B-035-PG0-AN is a servo motor produced by Bosch Rexroth Indramat within the MHD Synchronous Motors series. As a closed-loop actuator, it converts electrical power into precisely controlled rotary motion for positioning tasks in automated machinery. The motor is part of the manufacturer's liquid-cooled range and uses digital feedback for coordinated drive control. This combination supports accurate motion, repeatable torque at standstill, and stable operation in demanding automation systems. Because the feedback system is integrated into the motor, the drive can monitor rotor position directly without relying on external sensing hardware.
Its continuous standstill torque is 28.0 Nm, which is the load it can hold at zero speed during continuous operation. Thermal energy is removed through liquid cooling, and coolant around the stator helps keep winding temperature within the Class F insulation limit. The motor face uses a 192 mm flange for mounting to machine frames, and the housing is rated IP65 to resist dust and low-pressure water jets. Position feedback comes from an optically scanned digital encoder with a system precision of ± 0.5 angular minutes, which supports accurate closed-loop control. The plain shaft is supplied without a holding brake, and power exits through an output connector on side A. This layout is useful where stable holding torque, accurate shaft positioning, and protected cable routing are needed in one motor assembly.
During storage, the motor tolerates temperatures from −20 to +80 °C, and continuous operation is allowed within an ambient range of 0 to 40 °C without derating. A machined centering diameter of 130 mm helps align the housing with the machine interface and reduce radial misalignment during installation. The drive receives position data as Absolute (>4096 revolutions) feedback, which supports multi-revolution reference tracking after power cycles. Installation is permitted up to 1,000 m above sea level, and the shaft seal helps keep lubricant in place while limiting the entry of contaminants. The seal also supports use in areas where coolant mist or fine debris may be present around the drive end. The size 112 laminations, B-length frame, and winding code 035 set the motor's electrical and mechanical layout for compatible MHD drive systems.
Frequently Asked Questions about MHD112B-035-PG0-AN:
Q: What is the continuous torque at standstill of the MHD112B-035-PG0-AN servo motor?
A: This model provides a continuous torque of 28.0 Nm at standstill.
Q: What type of housing cooling does the MHD112B-035-PG0-AN utilize?
A: The MHD112B-035-PG0-AN features a liquid cooling system for the housing.
Q: What kind of encoder and position detection does the MHD112B-035-PG0-AN have?
A: The encoder type is a digital servo feedback unit with an integrated encoder, offering absolute position detection for over 4096 revolutions.
Q: What is the degree of protection for the MHD112B-035-PG0-AN motor?
A: This servo motor has a protection rating of IP65, making it dust tight and protected against water jets.
Q: Does the MHD112B-035-PG0-AN include a holding brake?
A: The MHD112B-035-PG0-AN is manufactured without a holding brake.
