MHD112B-024-NG0-BN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911281194
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
20 Seconds
The Bosch Rexroth Indramat MHD112B-024-NG0-BN is a servo motor from the MHD Synchronous Motors series featuring a 192 mm flange size and a centering diameter of 130 mm. This motor provides a continuous torque at standstill of 28.0 Nm, utilizes liquid cooling, and comes without a holding brake. It uses digital servo feedback for position detection and is equipped with a plain shaft and shaft seal.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MHD112B-024-NG0-BN is a servo motor produced by Bosch Rexroth Indramat as part of the MHD Synchronous Motors series. Intended for industrial automation, the motor works with compatible digital drives to provide repeatable position and velocity control in packaging lines, material-handling gantries, and machining centers. By combining permanent-magnet excitation with electronic feedback, it delivers the dynamic response and accuracy required in multi-axis systems. Its operating profile suits applications that need fast acceleration, stable low-speed motion, and consistent tracking during repeated start-stop cycles. In transfer systems and indexing equipment, that control behavior helps reduce settling time and improves repeatability from cycle to cycle.
The centering shoulder diameter of 130 mm aligns the housing with precision locating surfaces, while the square flange width of 192 mm provides a standardized bolt pattern for rigid mounting. Under standstill conditions, the electromagnetic system can deliver a continuous torque of 28.0 Nm, permitting stable holding or slow-speed feed operations without overheating. Thermal energy is removed through a jacket that supports liquid cooling, so full rated torque can be sustained even in enclosed machine spaces. Rotor position is reported by high-resolution digital servo feedback (HSF), enabling the drive to close current and speed loops with minimal delay. This arrangement helps the axis maintain smooth motion during interpolation and rapid changes in load.
Electrical power enters through an output connector located on side B of the stator, letting the cable exit opposite the feedback plug for cleaner routing along machine frames. The connector layout can also keep power and feedback leads separated at the motor body, which helps simplify routing in tight machine spaces. A plain shaft with a factory-installed seal helps prevent lubricant leakage and accepts a wide range of coupling styles. Because the motor is supplied without a holding brake, load retention must be provided by drive torque or an external locking device when power is removed. The feedback system is relative, so the axis must be homed after startup before absolute positioning can begin. The electromagnetic circuit uses winding code 024, matching the motor to compatible drive inverters for this size and length combination.
Frequently Asked Questions about MHD112B-024-NG0-BN:
Q: What type of housing cooling does the MHD112B-024-NG0-BN motor utilize?
A: The MHD112B-024-NG0-BN features liquid cooling for enhanced thermal management.
Q: What is the continuous standstill torque of the MHD112B-024-NG0-BN motor?
A: This model delivers a continuous standstill torque of 28.0 Nm.
Q: What kind of encoder is included with the MHD112B-024-NG0-BN?
A: Digital servo feedback (HSF) is the encoder type used in this motor.
Q: What shaft type and sealing features does the MHD112B-024-NG0-BN motor offer?
A: The MHD112B-024-NG0-BN is designed with a plain shaft and a shaft seal.
Q: Does the MHD112B-024-NG0-BN motor come with a holding brake?
A: This motor is manufactured without a holding brake.
