MHD112A-024 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
3 Minutes
46 Seconds
The Bosch Rexroth Indramat MHD112A-024 is a servo motor from the MHD Synchronous Motors series with a centering diameter of 130 mm and a flange size of 192 mm. It is designated with a winding code of 024 and offers a continuous torque at standstill of 15.0 Nm.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MHD112A-024 is an electric rotary actuator manufactured by Bosch Rexroth Indramat as part of the MHD Synchronous Motors series. It is intended for high-response industrial motion systems, where it serves as the electromechanical link between a digital drive controller and machine loads such as linear tables, pick-and-place heads, or conveyor rollers. By converting regulated three-phase current into proportional shaft rotation, it delivers commanded torque and speed for coordinated interpolation in automated assembly, packaging, and metal-cutting equipment. Its synchronous design also supports rapid response to changing speed and position commands during repetitive duty cycles.
The motor provides a continuous standstill torque of 15.0 Nm, enabling it to hold static loads without excessive heating during dwell periods. Precise alignment with attached gearboxes is supported by a centering pilot diameter of 130 mm, which helps reduce radial misalignment when the housing is seated against the machine frame. A square mounting flange of 192 mm sets the bolt pattern and forms the reaction surface for mounting forces. This mounting face also supports direct attachment to machine plates or gearbox adapters. Magnetic and thermal behavior is tied to winding code 024, so the matching drive can apply current within the motor's copper-loss and insulation limits during cyclic acceleration and deceleration.
The motor uses frame size 112, which places it in a medium mechanical envelope for dynamic servo applications. The compact housing helps keep overall mass moderate, which is useful where axis inertia must stay low for rapid reversals and short positioning moves. The A length code indicates the shortest stator stack in this frame, reducing rotor inertia for indexing and feed applications. That layout suits axes that must accelerate, decelerate, and reverse direction frequently. When paired with suitable feedback electronics and a compatible drive, it operates as a servo motor for controlled position, velocity, and torque tasks.
Frequently Asked Questions about MHD112A-024:
Q: What is the centering diameter of the MHD112A-024 motor?
A: The MHD112A-024 features a centering diameter of 130 mm for precise mounting.
Q: How much continuous torque at standstill does the MHD112A-024 motor offer?
A: This model provides a continuous torque of 15.0 Nm at standstill.
Q: What is the flange size of the MHD112A-024 from the MHD Synchronous Motors series?
A: The MHD112A-024 comes with a flange size of 192 mm, ensuring compatibility with suitable mechanical systems.
Q: What is the length designation for the MHD112A-024 servo motor?
A: The motor has a length designation of 'A', indicating its MHD112 frame's shortest length option.
Q: What is the motor size of the Bosch Rexroth MHD112A-024 model?
A: This motor belongs to size 112 in the MHD Synchronous Motors series.
