MHD095C-058-PP1-BN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911320879
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
11 Seconds
The Bosch Rexroth Indramat MHD095C-058-PP1-BN is a servo motor from the MHD Synchronous Motors series featuring a continuous torque at standstill of 23.0 Nm and an IP65 degree of protection. It comes with a keyed shaft, a holding brake with a torque of 22.0 Nm, and uses liquid cooling for the housing. The motor features a digital servo feedback encoder with absolute position detection above 4096 revolutions and supports power connection to side B using an output connector.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MHD095C-058-PP1-BN is a servo motor built by Bosch Rexroth Indramat within the MHD Synchronous Motors series. Designed for closed-loop control tasks, the unit delivers programmable speed and position regulation to conveyor, press, and machining axes that must repeat cycles with tight tolerance. Its integrated encoder, keyed shaft, and sealed housing allow the motor to couple directly to gearboxes or load shafts while maintaining feedback integrity, making it a common choice for coordinated multi-axis gantries and automated assembly cells.
At standstill, the rotor can supply 23.0 Nm of continuous torque, a value supported by the 058 winding and a C-length stator. Thermal loading is removed through liquid cooling, so rated output is maintained even in closed cabinets. The housing has an IP65 rating that blocks dust ingress and water jets. Motion data is captured optically by the digital servo feedback system, which supports absolute position detection beyond 4096 revolutions and overall system accuracy of ± 0.5 angular minutes. To tolerate elevated winding temperatures, the motor is built with Class F insulation. A keyed shaft and a shaft seal help contain lubricant while transmitting torque to the driven load. Power is supplied through a connector on side B, matching common cabinet layouts.
During power-off events, a mechanical brake rated at 22.0 Nm clamps the rotor, preventing back-drive in vertical axes. Mounting is simplified by a 140 / 150 mm square flange and a 130 mm centering diameter that align the motor precisely on gearheads or adapter plates. The assembly remains functional at ambient temperatures from 0 °C to 40 °C, and it tolerates warehouse storage between -20 to +80 °C without performance loss. A maximum installation altitude of 1000 m above mean sea level helps maintain proper cooling performance.
Frequently Asked Questions about MHD095C-058-PP1-BN:
Q: What type of housing cooling is used in the MHD095C-058-PP1-BN motor?
A: The MHD095C-058-PP1-BN servo motor features liquid cooling for its housing, which aids efficient heat dissipation.
Q: What type of shaft design does the MHD095C-058-PP1-BN feature?
A: This motor is equipped with a keyed shaft that provides secure mechanical connection.
Q: What type of encoder is integrated in the MHD095C-058-PP1-BN servo motor?
A: The encoder on this model is a digital servo feedback unit with integrated encoder, providing absolute position detection for over 4096 revolutions.
Q: How much holding brake torque does the MHD095C-058-PP1-BN servo motor provide?
A: The holding brake on this motor delivers a braking torque of 22.0 Nm for secure stopping and holding.
Q: What is the degree of protection rating for the MHD095C-058-PP1-BN servo motor?
A: The MHD095C-058-PP1-BN has an IP65 degree of protection, making it resistant to dust and low-pressure water jets.
