Product Description:

The MHD095C-058-PG0-AN is a servo motor produced by Bosch Rexroth Indramat for the MHD Synchronous Motors series. With a motor size of 095 and a length code of C, the unit is intended for closed-loop axis control in machining centers, packaging equipment, and transfer lines where coordinated motion is required across feed axes, indexing stations, or handling modules. In these systems, the motor works with a digital controller and power cable to convert commanded current into position-synchronized torque, allowing machine axes to accelerate, maintain speed, reverse direction, and stop with repeatable motion during automated cycles.

The motor provides a continuous standstill torque of 23.0 Nm through a plain shaft with a shaft seal that helps protect the bearings from contamination during regular operation. A centering diameter of 130 mm aligns the flange during mounting, and the power cable exits on side A through an output connector that supports orderly cable routing in compact machine layouts. The housing has an IP65 rating and uses liquid cooling, so heat is removed through a coolant jacket rather than ambient air. The stator windings use Class F insulation and winding code 058. Motion feedback is generated by an optically evaluated digital servo encoder, and the motor comes without a holding brake.

The square flange measures 140 / 150 mm, giving the motor a mounting face suited to its frame size and typical industrial machine plates. The built-in measuring system provides a positioning accuracy of ± 0.5 angular minutes and supports Absolute (>4096 revolutions) resolution for multi-revolution tracking, so position information remains available across repeated shaft turns. Approved ambient temperatures are 0 to 40 °C, while storage is allowed from −20 to +80 °C. Installation is permitted up to 1000 m above mean sea level without derating.