MHD095C-058-NP1-AN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911293691
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
3 Minutes
40 Seconds
The Bosch Rexroth Indramat MHD095C-058-NP1-AN is a servo motor from the MHD Synchronous Motors series, featuring a 130 mm centering diameter and a flange size of 140 or 150 mm. It is equipped with a liquid-cooled housing, a keyed shaft with a shaft seal, and includes a holding brake with a torque of 22.0 Nm. This motor uses digital servo feedback for position detection and has a continuous standstill torque of 23.0 Nm.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MHD095C-058-NP1-AN synchronous servo motor is manufactured by Bosch Rexroth Indramat within the MHD Synchronous Motors series. It is intended for closed-loop industrial axes that need quick velocity changes and exact repeatability, providing electromechanical drive power to packaging lines, metal-working equipment, and material-handling gantries. Within a multi-axis system, it pairs with Indramat digital drives to translate commanded current into proportional torque across a wide speed range. This type of motor is commonly used where the control loop must maintain accurate motion through frequent starts, stops, and speed changes. Its servo design supports stable tracking during repeated positioning moves and synchronized machine sequences.
At standstill the motor can deliver 23.0 Nm of continuous torque, giving actuators a stable load capacity without overheating. The integrated jacket uses liquid cooling, which circulates through the housing and moves heat away from the stator so full rated current can be applied during prolonged cycles. Because heat is removed efficiently, the motor can support demanding duty cycles without relying on external airflow around the frame. A built-in brake rated at 22.0 Nm holds vertical loads when power is removed and helps prevent drift at rest. Alignment to gearboxes is simplified by the 130 mm centering diameter, while a rigid mounting face is provided by the square flange that measures 140 / 150 mm. These dimensions help the motor fit machine interfaces that use this common mounting pattern.
Position data is generated by a digital servo feedback (HSF) encoder that streams high-resolution incremental counts to the drive controller. The feedback is relative, so the axis must complete a reference routine after power-up before absolute machine position is known. Mechanical energy is transferred through a keyed shaft, and a radial shaft seal helps limit coolant or dust ingress along the journal during operation. Power and earth conductors exit on side A through an output connector, which can simplify cable routing where rear clearance is limited. The 095 frame, C length, and winding code 058 match the motor to compatible Indramat power modules and support predictable electrical behavior in closed-loop service. This layout can also reduce cable bend stress when the connector area faces a cabinet wall or machine guard.
Frequently Asked Questions about MHD095C-058-NP1-AN:
Q: What type of shaft does the MHD095C-058-NP1-AN motor provide?
A: The MHD095C-058-NP1-AN features a keyed shaft design for secure attachment to mechanical components.
Q: What encoder type is used on the MHD095C-058-NP1-AN?
A: The encoder on this motor is a digital servo feedback (HSF) type, supporting relative position detection.
Q: What cooling method does the MHD095C-058-NP1-AN motor use?
A: This motor model is equipped with liquid cooling, helping to maintain optimal operating temperatures.
Q: How much torque does the holding brake provide on the MHD095C-058-NP1-AN?
A: The holding brake on the MHD095C-058-NP1-AN delivers a brake torque of 22.0 Nm.
Q: What is the continuous standstill torque for the MHD095C-058-NP1-AN?
A: This motor has a continuous torque at standstill of 23.0 Nm.
