MHD095C-058-NP0-AN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911294300
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
12 Seconds
The Bosch Rexroth Indramat MHD095C-058-NP0-AN is a servo motor from the MHD Synchronous Motors series featuring liquid cooling and digital servo feedback for position detection. It provides 23.0 Nm of continuous torque at standstill, has a keyed shaft with a seal, and does not include a holding brake. The motor is sized at 095, with a centering diameter of 130 mm and a flange size of 140 or 150 mm.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MHD095C-058-NP0-AN is a servo motor produced by Bosch Rexroth Indramat within the MHD Synchronous Motors series. Motors in this series support repeatable speed and position control in machine tools, packaging equipment, and automated material-handling systems. By coupling an interior permanent-magnet rotor to external mechanics, the unit converts drive current into controlled rotary motion for closed-loop operation with a compatible Indramat drive controller. This arrangement lets the drive adjust torque and speed quickly as load conditions change during indexing, positioning, or continuous-motion tasks. The motor is supplied without a holding brake, so position retention during power-off must be provided by external mechanics or drive torque.
The motor provides a continuous standstill torque of 23.0 Nm, which indicates how much stationary load it can support at rated winding temperature. Heat is removed by liquid cooling, allowing the motor to maintain high torque density even in enclosed installations. Because heat is carried away by coolant rather than surface airflow, surrounding cabinet air has less effect on continuous operation. A centering diameter of 130 mm helps align the motor accurately on the machine interface, and the mounting face accepts a flange size of 140 / 150 mm for standard bolt patterns. Torque is transmitted through a keyed shaft, which helps prevent slip between the shaft and the connected hub during acceleration and braking.
Rotor position is measured by digital servo feedback (HSF), which supplies high-resolution incremental data for commutation and motion control. The feedback system uses relative reference marks rather than absolute multi-turn tracking, so the control system derives position from incremental signals after referencing. Winding code 058 identifies the electrical values used with matching MHD drives. Power leads exit the housing through an output connector on side A, which can simplify cable routing when that orientation matches the machine layout. The motor also has a shaft seal to help block coolant or oil from entering the bearing chamber. Its physical proportions correspond to motor size 095 with motor length C, placing it in the dimensional group for this frame.
Frequently Asked Questions about MHD095C-058-NP0-AN:
Q: What is the continuous torque at standstill for the MHD095C-058-NP0-AN servo motor?
A: The MHD095C-058-NP0-AN servo motor provides a continuous torque of 23.0 Nm at standstill.
Q: What encoder type is used on the MHD095C-058-NP0-AN motor?
A: This model features digital servo feedback (HSF) as its encoder type for position detection.
Q: What shaft design does the MHD095C-058-NP0-AN feature?
A: A keyed shaft design is used for this servo motor, allowing secure mechanical coupling.
Q: What type of housing cooling does the MHD095C-058-NP0-AN use?
A: The MHD095C-058-NP0-AN motor is equipped with liquid cooling for thermal management.
Q: Is a holding brake included on the MHD095C-058-NP0-AN motor?
A: This motor does not include a holding brake.
