Product Description:

The MHD095C-058-NG0-BN is a servo motor produced by Bosch Rexroth Indramat for the MHD Synchronous Motors series. As a rotary actuator intended for CNC, packaging, and material-handling axes, it converts drive current into tightly controlled speed and position so that automated stations can synchronize motion with process demands. Its design integrates position sensing, cooling, and power interfaces required for closed-loop industrial drives. This arrangement allows the controller to correct motion errors quickly during starts, stops, and reversals.

At the mechanical level, the unit supplies a continuous standstill torque of 23.0 Nm, enabling it to resist load when stationary without overheating. The mounting flange follows the 140 / 150 mm pattern and is centered by a 130 mm pilot diameter, allowing interchange with other motors of the 095 size. Environmental sealing reaches IP65, which helps keep dust and water jets away from internal components. Heat generated in the stator is removed through liquid cooling, maintaining winding temperature below the Class F limit during high cycle rates. The plain shaft mates to couplings without keys, and a shaft seal helps protect the bearing area. Power is fed on side B through a connector that matches the 058 winding.

Dynamic feedback is furnished by a digital servo feedback (HSF) encoder that delivers relative position data with a precision of ± 0.5 angular minutes. Optical scanning supports repeatable position reporting while keeping the housing compact. This feedback supports stable low-speed control. The motor operates in ambient temperatures from 0 to 40 °C at elevations up to 1000 m above mean sea level, and it can be stored within -20 to +80 °C without damage to magnets or insulation. The motor has no holding brake, so external holding force may be required on vertical axes. Insulation meets Class F, and the C-length housing leaves room for liquid manifolds.