Product Description:

The MHD095C-035-PP0-AN is a servo motor produced by Bosch Rexroth Indramat within the MHD Synchronous Motors series. Designed for industrial automation, the unit converts drive commands from a controller into precise rotary motion for positioning tasks on packaging lines, gantries, and material-handling axes. It is suited for applications that require repeatable motion, accurate starts and stops, and stable speed control during continuous production cycles.

Its standstill output is rated at 23.0 Nm of continuous torque, giving machines enough holding force to resist static process loads without overheating. A protection rating of IP65 seals the housing against dust ingress and low-pressure water jets, enabling direct mounting outside electrical enclosures. Position feedback is obtained through a digital servo encoder that uses an optical measurement method, and a system precision of ± 0.5 angular minutes supports repeatable indexing of the load. A flange size of 140 / 150 mm matches common gearbox and frame interfaces. The stator jacket is fitted for liquid cooling, so thermal losses are carried away by coolant circulation instead of ambient airflow. Keyed shaft output and an output connector on side A simplify mechanical and electrical integration.

For storage and transit, the motor tolerates temperatures from -20 to +80 °C. It runs in ambient conditions from 0 to 40 °C without derating, which supports use on factory floors with controlled climate. The centering pilot is machined to 130 mm, which helps keep adjacent components concentric during assembly. Absolute multi-turn feedback spanning more than 4096 revolutions gives the drive immediate awareness of rotor position after power-up, and this feature is listed as Absolute (>4096 revolutions). Operation is possible up to 1000 m above mean sea level, and the F-class insulation system withstands winding temperatures up to 155 °C. The design omits a holding brake to reduce overall mass.