Product Description:

The MHD095C-035-PG1-RN belongs to the MHD Synchronous Motors series produced by Bosch Rexroth Indramat. As a servo motor, it delivers closed-loop rotary positioning for machinery that requires repeatable accuracy and high cycle rates. Its integrated digital encoder supplies absolute position data to the drive, enabling quick synchronization of coupled axes in packaging, handling, or forming equipment. Because the feedback system is built into the motor, the axis can retain position information after normal power cycles and operate with a compact machine interface.

This motor sustains a continuous standstill torque of 23.0 Nm, a level suited for holding static loads during dwell phases without overheating. A centering diameter of 130 mm aligns the frame to the mounting pilot on a 140 or 150 mm flange, while the plain shaft and shaft seal help protect the bearings from contamination. The enclosure has an IP65 rating, so dust and low-pressure water jets do not compromise operation. Heat is removed through liquid cooling, allowing the winding code 035 to maintain thermal balance under continuous duty. Class F insulation supports elevated winding temperatures, and the optical feedback system also provides high-resolution velocity data. Wiring enters from the right through a molded power connector that matches standard cable sets.

Installation is permitted up to 1000 m above mean sea level, and the motor runs within an ambient range of 0 to 40 °C without derating. When power is removed, an integral brake produces 22.0 Nm to secure vertical or torsion-loaded axes. Position verification is achieved with a system accuracy of ± 0.5 angular minutes, and the internal encoder stores multi-turn data as Absolute (>4096 revolutions) for homing-free startups. Storage temperatures from −20 °C to 80 °C accommodate extended idle periods, and the C length with the 095 frame size allows the motor to fit common machine layouts within the MHD platform.