MHD095C-035-PG1-AN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911294059
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
2 Seconds
The Bosch Rexroth Indramat MHD095C-035-PG1-AN is a servo motor from the MHD Synchronous Motors series with a continuous torque at standstill of 23.0 Nm and a holding brake torque of 22.0 Nm. It features liquid cooling, a plain shaft with seal, and IP65 protection. This model includes digital servo feedback with an integrated encoder that supports absolute position detection exceeding 4096 revolutions.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MHD095C-035-PG1-AN servo motor is produced by Bosch Rexroth Indramat for the MHD Synchronous Motors series. Designed for closed-loop industrial automation, it transforms drive current into controlled rotary motion for packaging lines, machine tools, and handling axes. The motor integrates with Indramat drive controllers so that speed, torque, and position commands issued by the PLC are transferred directly to the mechanical load. It is suited to applications where accurate response to command changes is needed during frequent cycle transitions.
At the stator, a continuous standstill torque of 23.0 Nm is available, giving machines enough holding force during low-speed processes. Internal coolant passages support liquid cooling, while a sealed housing rated to IP65 blocks dust and water jets. A spring-applied holding brake supplies 22.0 Nm to keep the shaft fixed when the controller is disabled. Position feedback is generated by digital servo electronics that use an optical scanning method and report absolute position values over more than 4096 revolutions. This closed-loop arrangement supports a system accuracy of ±0.5 angular minutes. The windings use code 035 with Class F insulation, and the C-length size-095 frame can be mounted at elevations up to 1000 m above mean sea level without derating.
Normal service is specified for ambient temperatures between 0 to 40 °C, while storage is permitted from −20 to +80 °C without damage to materials. Power lines leave the housing on side A through an output connector, which helps route cables away from the front mounting face. The side-A connector position can also simplify access in cabinets where space around the motor body is limited. The rotor has a plain shaft with a shaft seal for splash-proof operation. A centering diameter of 130 mm and a flange pattern of 140 / 150 mm align the motor to gearboxes or machine frames with minimal concentricity error.
Frequently Asked Questions about MHD095C-035-PG1-AN:
Q: What type of encoder is integrated in the MHD095C-035-PG1-AN motor?
A: The MHD095C-035-PG1-AN uses digital servo feedback with an integrated encoder for position detection.
Q: What is the continuous torque at standstill for the MHD095C-035-PG1-AN?
A: This model has a continuous torque at standstill of 23.0 Nm.
Q: Does the MHD095C-035-PG1-AN have a holding brake, and what is its torque?
A: The motor is equipped with a holding brake rated at 22.0 Nm.
Q: What is the degree of protection for the MHD095C-035-PG1-AN motor?
A: It features a degree of protection rated at IP65.
Q: What type of cooling does the MHD095C-035-PG1-AN motor use?
A: The housing of this model is liquid cooled for thermal management.
