Product Description:

The MHD095C-035-PG0-BN is a servo motor manufactured by Bosch Rexroth Indramat and assigned to the MHD Synchronous Motors series. As a torque source for CNC tables, pick-and-place axes, and automated conveyors, it delivers position-controlled rotation that can be coordinated by digital drives. The designation combines motor size 095, stack length C, and winding code 035, allowing the unit to be matched with compatible platform requirements.

Its continuous standstill capability of 23.0 Nm allows the axis to hold static loads without auxiliary brakes, even though the motor is supplied without a holding brake. The housing uses liquid cooling to keep winding temperature within the Class F limit during sustained loads, while the enclosure rating of IP65 seals the stator against dust and low-pressure water jets. Mounting is simplified by a centering diameter of 130 mm and a flange that follows the 140 / 150 mm bolt circle, so alignment with gearboxes and machine frames is repeatable. A plain shaft with an integral shaft seal prevents lubricant escape, and power is routed to side B through an output connector, reducing cable loops inside the cabinet.

Position feedback is provided by digital servo feedback with an integrated encoder that uses an optical measurement method and supplies an absolute position value of more than 4096 revolutions. Combined with a system accuracy of ± 0.5 angular minutes, the motor supports fine interpolation for contouring tasks. The windings use Class F insulation so permissible copper temperature aligns with IEC limits. Operation is specified from 0 to 40 °C ambient and up to 1000 m above mean sea level, while storage is permitted between −20 °C and +80 °C. The unit also includes digital winding code identification for drive recognition and relies on absolute feedback to eliminate homing moves after power-on.