MHD095C-035-NP1-BN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911309460
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
48 Seconds
The Bosch Rexroth Indramat MHD095C-035-NP1-BN is a servo motor from the MHD Synchronous Motors series, featuring liquid cooling and a keyed shaft design. It provides a continuous torque at standstill of 23 Nm and is equipped with a holding brake rated at 22 Nm. The motor also includes a digital servo feedback encoder and offers IP65 protection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MHD095C-035-NP1-BN is a servo motor manufactured by Bosch Rexroth Indramat within the MHD Synchronous Motors series. It uses a relative optical feedback system with digital servo signals so the drive can track rotor position and velocity during closed-loop motion in automated lines, presses, and handling modules. The motor also has a keyed steel shaft and an F-class insulation system, which support dependable mechanical power transfer and stable thermal performance during repeated duty cycles. Its housing is arranged for liquid-cooled operation, making it suitable where compact installation and continuous torque are required.
The motor delivers a continuous standstill torque of 23.0 Nm, allowing it to hold substantial loads without excessive winding stress. Heat is removed by liquid cooling, which helps keep operating temperatures stable during extended use. The enclosure is rated IP65, so dust and water jets are kept away from internal parts and the feedback device. A spring-applied brake provides 22.0 Nm of holding torque to resist back-driving when power is removed. Mechanical alignment is supported by a 130 mm centering diameter and a flange that matches 140 / 150 mm bolt patterns, which helps the motor fit standard machine interfaces with less adjustment.
The output side uses a keyed shaft with an integral seal that helps block lubricant migration from connected gearboxes. For storage and transport, the motor can withstand temperatures from -20 to +80 °C. During normal operation, the ambient temperature range is 0 to 40 °C, and installation is permitted up to 1000 m above mean sea level. The optical measuring method and relative position detection support a system accuracy of ± 0.5 angular minutes, which helps the drive maintain precise axis movement. Power enters through a connector on side B, which helps keep cable routing clear of the mounting face.
Frequently Asked Questions about MHD095C-035-NP1-BN:
Q: What is the continuous torque at standstill for the MHD095C-035-NP1-BN motor?
A: The MHD095C-035-NP1-BN supports a continuous standstill torque of 23.0 Nm.
Q: What type of housing cooling does the MHD095C-035-NP1-BN motor have?
A: This model features liquid cooling for effective thermal management during operation.
Q: What shaft design is included on the MHD095C-035-NP1-BN?
A: The motor is equipped with a keyed shaft and a shaft seal for secure coupling and protection.
Q: Does the MHD095C-035-NP1-BN have a holding brake and what is its torque?
A: A holding brake is included on this unit, delivering a holding torque of 22.0 Nm.
Q: Where is the power connection located on the MHD095C-035-NP1-BN motor?
A: The power connection is provided via an output connector located on side B.
