MHD095C-035-NP1-AN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911299801
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
3 Minutes
18 Seconds
The Bosch Rexroth Indramat MHD095C-035-NP1-AN is a servo motor from the MHD Synchronous Motors series featuring IP65 protection, a liquid cooling housing, and a keyed shaft design. It delivers a continuous torque at standstill of 23.0 Nm and includes a holding brake with a torque of 22.0 Nm. The motor uses digital servo feedback for position detection and has a centering diameter of 130 mm with an insulation class F.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MHD095C-035-NP1-AN is a servo motor produced by Bosch Rexroth Indramat as part of the MHD Synchronous Motors series. It supplies controlled torque and speed to automated axes in packaging lines, material-handling cells, and assembly stations. The product is a servo motor with a keyed shaft that mates directly to gearboxes or pulleys, while its integrated digital feedback allows the drive to maintain tight position loops. The 095 frame size, C length, and 035 winding code set its electrical loading and thermal behavior for mid-range duty cycles. This layout suits positioning applications that need repeatable motion without a large motor footprint.
Its rated continuous torque at standstill is 23.0 Nm, which lets the axis hold commanded position under steady load. The motor has an IP65 enclosure that helps protect the windings and bearings from dust and low-pressure water spray. Heat from stator losses is removed through liquid cooling, allowing sustained output without relying on ambient airflow. Mounting is centered by a 130 mm centering diameter that aligns the 140/150 mm flange with the machine frame. A high-speed HSF encoder is scanned optically and provides a system accuracy of ±0.5 angular minutes for precise positioning. The motor operates in ambient temperatures from 0 to 40 °C. A shaft seal protects internal components, and the power cables exit on side A through an output connector for compact routing.
For dynamic axes that stop frequently, the built-in holding brake supplies 22.0 Nm of torque, which helps keep vertical or suspended loads secure when power is removed. Storage is permitted from -20 to +80 °C without damage to internal materials. Installation is permitted up to 1000 m above sea level, so the motor can be used in elevated facilities without changing its basic operating range. Because the feedback system provides relative position detection, the axis needs a homing routine after startup before absolute machine position is known. The liquid-cooled housing also helps limit thermal drift during long production cycles.
Frequently Asked Questions about MHD095C-035-NP1-AN:
Q: What encoder type does the MHD095C-035-NP1-AN motor feature?
A: This motor uses digital servo feedback (HSF) for encoder type.
Q: What level of environmental protection does the MHD095C-035-NP1-AN provide?
A: The degree of protection is IP65, ensuring resistance to dust and water jets.
Q: How much torque does the holding brake offer on the MHD095C-035-NP1-AN motor?
A: The holding brake on this model provides a torque of 22.0 Nm.
Q: What type of cooling system is implemented in the MHD095C-035-NP1-AN motor?
A: Liquid cooling is used for the housing in this motor.
Q: What kind of shaft design and sealing does the MHD095C-035-NP1-AN include?
A: This motor is equipped with a keyed shaft and a shaft seal.
