MHD095C-035-NG1-BN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911298546
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
3 Minutes
16 Seconds
The Bosch Rexroth Indramat MHD095C-035-NG1-BN is a servo motor from the MHD Synchronous Motors series with a continuous torque at standstill of 23.0 Nm and liquid cooling for the housing. It features a digital servo feedback encoder type, has a flange size of 140 or 150 mm, and includes a holding brake with 22.0 Nm torque.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MHD095C-035-NG1-BN is a three-phase AC servo motor manufactured by Bosch Rexroth Indramat and part of the MHD Synchronous Motors series. It is intended for use with Rexroth digital drive controllers in applications that demand high positional repeatability, steady speed regulation, and continuous duty under changing loads. Inside automated equipment, it converts commanded current into rotary motion so that pick-and-place axes, indexing tables, and spindle drives can follow precise velocity and position profiles. This makes the motor suitable for motion systems that need accurate starts, stops, reversals, and stable low-speed operation over long production cycles.
At the core of this model is a continuous standstill torque of 23.0 Nm, allowing long-term load holding without overheating when the axis must remain controlled at zero speed. The centering pilot diameter is 130 mm, and the frame carries a square mounting pattern of 140 / 150 mm for direct installation on matching machine faces. Heat generated in the stator is removed through liquid cooling, which circulates coolant around the housing to maintain stable operating temperature during cyclic acceleration and sustained low-speed operation. Rotor position is transmitted to the drive by digital servo feedback (HSF), giving high-resolution incremental data for commutation, speed control, and fault monitoring.
During power-off events, an integrated brake delivers 22.0 Nm of holding torque to lock the rotor and help keep the axis from drifting after power is removed. Output power is transferred through a ground, hardened plain shaft with a radial seal, while the main power connector exits on side B to simplify cable routing along machine guides and nearby housings. Winding code 035 identifies the electrical characteristics used with compatible converters across the intended speed range. The cable and shaft arrangement helps the motor fit installations where cooling lines, feedback leads, and power conductors must be routed cleanly within limited machine space.
Frequently Asked Questions about MHD095C-035-NG1-BN:
Q: What type of housing cooling is used on the MHD095C-035-NG1-BN motor?
A: This model features liquid cooling for efficient heat dissipation during operation.
Q: What is the continuous torque at standstill for the MHD095C-035-NG1-BN?
A: The MHD095C-035-NG1-BN provides 23.0 Nm of continuous torque at standstill.
Q: What shaft design does the MHD095C-035-NG1-BN use?
A: A plain shaft design is utilized in this model, suitable for direct coupling to loads.
Q: In which direction is the power connection on the MHD095C-035-NG1-BN motor?
A: The power connection on this motor is oriented toward side B for installation flexibility.
Q: Is there a holding brake included with the MHD095C-035-NG1-BN, and what is its torque?
A: This motor is equipped with a holding brake rated for 22.0 Nm of torque.
