Product Description:

The MHD095C-024-PG0-BN is a servo motor manufactured by Bosch Rexroth Indramat and part of the MHD Synchronous Motors series. It uses winding code 024, motor size 095, and length code C, which place it in a mid-frame format used in automated tooling, packaging, and material-handling equipment. Within an integrated motion system, the device converts electrical energy into regulated torque and speed so the controller can execute coordinated moves at rotary load points. It is intended for use where the motor must respond accurately to changing command values from the drive.

At standstill, the rotor can supply a continuous torque of 23.0 Nm, allowing the axis to hold load without thermal overload. The housing has an IP65 rating, so dust and water jets are kept away from internal parts during normal industrial use. Position information is provided by digital servo feedback from a built-in optical encoder, which eliminates the need for an external transducer. The motor uses a flange of 140 / 150 mm with a 130 mm centering diameter for rigid mounting to the machine structure. Heat is removed by liquid cooling, which supports high continuous output in compact cabinets, and the windings use Class F insulation for elevated internal temperatures. The motor also has a plain shaft with a shaft seal, power cabling that exits on side B through an output connector, a maximum installation height of 1000 m above sea level, and no holding brake.

The motor operates in ambient temperatures from 0 to 40 °C. It may be stored from -20 to +80 °C without damage. Closed-loop positioning is aided by a system accuracy of ± 0.5 angular minutes. It also supports absolute position tracking of Absolute (>4096 revolutions), so multi-turn position data remains available after power cycles and reference runs are not required at startup.