Product Description:

The MHD095B-035-PP0-BN is a synchronous servo motor produced by Bosch Rexroth Indramat for the MHD Synchronous Motors series. It integrates digital servo feedback with an internal absolute encoder so the drive controller always knows true rotor position during automated positioning, indexing, and process-control tasks. The unit’s keyed shaft, power connector on side B, and liquid-ready housing let machine builders mount and plumb it quickly into motion axes that must run inside sealed cabinets or coolant circuits.

This motor delivers a continuous standstill torque of 17.5 Nm, enabling stable force production when the load is held motionless. A protection rating of IP65 keeps dust ingress and water jets from reaching the windings or bearings. Heat is removed through liquid cooling, so full thermal performance can be achieved with minimal airflow inside the enclosure. Position feedback resolution supports a system accuracy of ± 0.5 angular minutes, which is suitable for precision pick-and-place or coordinated multi-axis motion. The motor operates within an ambient range of 0 to 40 °C, matching standard control-cabinet climate requirements. Because the motor does not include a holding brake, an external mechanical lock is required when power-off torque retention is needed.

The motor has a centering diameter of 130 mm and a square flange pattern of 140 / 150 mm for direct coupling to planetary gearboxes or machine frames. Class F insulation withstands winding temperatures up to 155 °C. The absolute position system tracks more than 4096 revolutions without loss of reference. Additional characteristics include optical encoder measurement, winding code 035, motor size 095 with length B, and a shaft seal that helps block lubricant egress. The motor can be used up to 1000 m above sea level and can be stored between -20 and +80 °C.