MHD095B-035-NG1-AN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911299074
The Bosch Rexroth Indramat MHD095B-035-NG1-AN is a servo motor from the MHD Synchronous Motors series, featuring a continuous standstill torque of 17.5 Nm and a holding brake with 22.0 Nm torque. This motor uses digital servo feedback, has an IP65 degree of protection, and employs liquid cooling for its housing. It is equipped with a plain shaft and optically measured system accuracy of ± 0.5 angular minutes.
Internal Product Review
The MHD095B-035-NG1-AN is a Bosch Rexroth Indramat servo motor that stands out in precision motion applications with digital servo feedback and relative position detection. Liquid cooling and IP65 protection support dependable performance in demanding machine environments. A 22.0 Nm holding brake paired with 17.5 Nm continuous standstill torque makes the unit a strong choice for controlled servo applications.
Have a part to sell?
Wake Industrial Warranty
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MHD095B-035-NG1-AN is a servo motor produced by Bosch Rexroth Indramat within the MHD Synchronous Motors series. Designed for closed-loop motion axes, it converts drive-supplied AC power into controlled rotation for packaging, printing, and material-handling machines. When paired with a compatible drive, it supports precise speed and position control across repeated machine cycles. The unit uses motor size 095 with length code B and a smooth shaft for direct coupling. Its winding code 035 matches the electrical characteristics expected by compatible Indramat drive controllers, and a connector on side A provides the power interface. A factory-mounted holding brake secures the shaft when the controller is disabled.
The motor delivers a continuous standstill torque of 17.5 Nm, giving stable holding force or low-speed feed force without thermal overload. The housing is sealed to IP65, so dust and low-pressure water jets are kept away from internal components. Heat is removed by liquid cooling, which supports high power density in compact machine layouts. Rotor position is measured by digital servo feedback (HSF), an optical system that supplies relative position data to the drive. Position accuracy is ± 0.5 angular minutes, supporting precise contouring tasks. The motor uses a flange pattern of 140 / 150 mm with a 130 mm centering diameter for accurate mounting on compatible machine surfaces.
Storage temperatures range from -20 to +80 °C, while the permitted ambient operating range is 0 to 40 °C. No derating is required at installation heights up to 1000 m above sea level, which supports use in standard industrial locations. The internal holding brake provides 22.0 Nm of static torque for load holding on vertical axes, and it is intended to hold a stopped load rather than stop motion dynamically. Class F insulation supports winding temperatures up to 155 °C during normal thermal loading, and a shaft seal helps limit contaminant entry and lubricant migration.
