MHD095B-035-NG0-BN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911296168
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MHD095B-035-NG0-BN is a servo motor from the MHD Synchronous Motors series that features liquid cooling and a continuous torque at standstill of 17.5 Nm. It has a digital servo feedback encoder, IP65 degree of protection, and a plain shaft with a shaft seal. This motor is built with a flange size of 140/150 mm and is suitable for operating ambient temperatures from 0 to 40 °C.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MHD095B-035-NG0-BN is a synchronous servo motor built by Bosch Rexroth Indramat for the MHD Synchronous Motors series. With a frame size of 095 and a length code of B, the unit fits medium-duty drive axes where compact mechanical envelopes are preferred. As a drive component, it supplies precisely metered torque to machine elements under command of an electronic controller, allowing repeatable positioning and speed control in automated production lines. This type of motor is commonly used on feed axes, indexing stations, and handling systems that need smooth acceleration and stable low-speed response.
At the mechanical interface, the motor offers a centering pilot of 130 mm, giving a concentric reference face for rigid flange mounting. Under rated excitation, it can deliver a continuous standstill torque of 17.5 Nm, so holding force is available without motion while thermal limits are observed. Heat generated in the stator is removed through liquid cooling, permitting higher load cycles than air-cooled housings. Position data are returned to the drive via digital servo feedback (HSF); this optical system provides high-speed signals while maintaining a relative measuring principle. The housing carries a protected output connector on side B, uses a plain shaft with a shaft seal, and has an IP65 enclosure that resists dust and low-pressure water jets.
The square flange uses a mounting-hole pattern of 140 / 150 mm, matching common gearbox and machine interface dimensions in this motor class. Class F insulation permits winding temperatures up to 155 °C, supporting the thermal demands of the 035 winding code during continuous industrial duty. The motor operates in ambient temperatures from 0 to 40 °C and can be stored from -20 to 80 °C when it is not in service. With its optical measuring path, the system reaches a positioning accuracy of ± 0.5 angular minutes for precise axis control. Because no holding brake is installed, any load that must remain fixed after power is removed needs an external clamping or braking device.
